625739
19
Zoom out
Zoom in
Previous page
1/52
Next page
19
GYSFLASH 50-12 HF
DE
«LADUNG» MODUS-EINSTELLUNG ABHÄNGIG VOM
BATTERIETYP
Easy
Nass
Gel / AGM
expert
10Ah
11Ah
...
600Ah
LADUNG 12V
Gel/AGM
80Ah
12V
80Ah
12V
80Ah
LADUNG
Gel/AGM
LADUNG
Gel/AGM
Ladekurve verfügbar nur wenn das Menü
«ADVANCED MENU» aktiviert ist.
Nur bei den Kurven liquid und Gel/AGM.
Erste Schritte:
• Verbinden Sie die Ladeklemmen: rot (+)
und schwarz (-) mit der Batterie.
• Drücken Sie auf den EIN-AUS-Schalter.
Der Ladevorgang beginnt.
• Während des Ladens zeigt das Gerät
abwechselnd den Ladenfortschritt in Pro-
zent (%), die Spannung, den Strom, die
Ampere-Stunde und die vergehende Zeit.
ERSTE SCHRITTE IM «LADUNG» MODUS
10%
12V
80Ah
LADUNG
LADUNG
Gel/AGM
U=12.5V
Q=2.5Ah
I=10A
00h22
NB: Wenn die Batterie vollständig geladen ist (100 %) und angeschlossen bleibt, bleibt der Ladezustand der Batterie
durch den «Floating Modus» erhalten.
Während des Ladens sollte der Stromverbrauch des Fahrzeuges auf einen Minimum reduziert werden (Fernlicht ausschalten, den
Motor ausschalten, Türen schließen), um den Ladevorgang nicht zu stören.
Vorsicht : Prüfen Sie gegebenenfalls den Säuregehalt der Batterie vor dem Ladevorgang.
"DIAG+" MODI
Während der Diagnose bei Motorstillstand hält das GYSFLASH die Stromversorgung der Bordbatterie für elektrische Verbraucher
(Motorkühlung, Fensterheber, Bordelektronik, usw.) bis 50 A aufrecht. Es hält eine konstante Spannung von: - 12 V bis 14,8 V
Spannungseinstellung:
Die Spannung an der Batterie kann in 0,1 V Schritten nach Vorgabe des jeweiligen Herstellers eingestellt werden.
EINSTELLUNGEN «DIAG+» MODUS
12.0V
12.1V
...
14.8V
DIAG+
U=13.5V
12V
DIAG+
U=13.2V
12V
Erste Schritte:
• Verbinden Sie die Ladeklemmen: rot (+) und
schwarz (-) mit der Batterie.
• Drücken Sie den START/STOP Knopf.
• Der momentan verbrauchte Strom und die momen-
tane Spannung werden angezeigt.
START «DIAG+» MODUS
I=12A
U=13.5V
DIAG+
U=13.5V
12V DIAG+ 12V
Vorsicht : Wenn zu Beginn des "Diag+" Modus mehr als 10 A Stromverbrauch angezeigt werden, bedeutet dies, dass die Batterie
entladen ist. Das GYSFLASH wird automatisch einen Ladevorgang beginnen. Prüfen Sie, ob alle elektrischen Verbraucher im Fahrzeug
ausgeschaltet sind. Warten Sie, bis der Strom unter 10 A liegt, ehe Sie die Diagnose durchführen.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys GYSFLASH 50-12 HF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys GYSFLASH 50-12 HF in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info