625734
9
Zoom out
Zoom in
Previous page
1/28
Next page
9/28
It is autoprotected to stop charging (+
will be displayed) if the voltage of the battery drops below
1V±0.5V).
The GYSFLASH has a thermal sensor, and if the machine becomes too hot during the charge cycle, it
will automatically reduce the power of charge. When the temperature is acceptable, the GYSFLASH
will come back to its normal charging power.
PROBLEMS, CAUSES AND SOLUTIONS
In case of problem, the charger automatically switches on protection mode and the power
indicator illuminates. The system will remain in that position until the user intervenes.
Problem
Causes
Solutions
Power Indicator
Illuminates
Short circuit
Circuit open
Battery voltage
< 1V ± 0.5 (for a 12V battery)
1- Check that there is no voltage loss
in the vehicle circuit
2-
Check that the clamps are well
connected
3- After corrections, if the
indicator is still on, the sulph
ated
or damaged battery should
be
replaced (nb: are you in 12V or 13.
6V
mode maximum? Please try the
recovery function)
Indicator is on
and
is flashing
Polarity reversal
Check that the clamps are correctly
connected
Wrong battery voltage
24V battery connected
Both indicators are
on
The unit has detected a battery
that can’t be recovered.
Change the battery.
Thermal fault
The temperature is too high, ventilate
the area.
D
ECLARATION OF COMPLIANCE
GYS certifies that the product described on this manual is manufactured in compliance with the requirements
of the following European directives:
- Low Voltage Directive: 2006/95/CE - 12/12/2006
- EMC Directive: 2004/108/CE, 15/12/2004,
It therefore complies with the following harmonized standards: EN60335-1 - EN60335-2-29 EN55014-1 -
EN55014-2 EN61000-3-2– EN61000-3-3 EN62233.
XX
XXX
XXX
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys GYSFLASH 4A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys GYSFLASH 4A in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info