625737
20
Zoom out
Zoom in
Previous page
1/52
Next page
20
GYSFLASH 40-12 FV
DE
"SHOWROOM" MODUS
Bei Motorstillstand ermöglicht das GYSFLASH die Nutzung elektrischer Verbraucher (Motorkühlung, Fensterheber, Bordelektronik,
usw..) mit einem konstanten Strom bis 40 A bei einer einstellbaren Spannung von:
- 12 V bis 14,8 V
Spannungseinstellbereich:
Es ist möglich, die Spannung an der Batterie in 0,1 V Schritten nach Spezikation des jeweiligen Herstellers einzustellen.
EINSTELLUNG «SHOWROOM» MODUS
12.0V
12.1V
...
14.8V
SHOWROOM
U=13.5V
12V
SHOWROOM
U=13.7V
12V
Erste Schritte:
• Verbinden Sie die Ladeklemmen: rot (+) und
schwarz (-) mit der Batterie.
• Drücken Sie den START/STOP Knopf.
• Die Stromaufnahme und die mom. Spannung
wird angezeigt.
START «SHOWROOM» MODUS
SHOWROOM
U=13.5V
I=12A
U=13.5V
12V
SHOWROOM
12V
Anschluss ohne Batterie (nicht empfohlen):
Es ist möglich das Fahrzeug ohne Batterie mit Strom zu versorgen, indem Sie den START/STOP Knopf 3 Sekunden lang drücken.
Auf dem Display erscheint für 1 Sekunde «No battery» bevor das Fahrzeug vesorgt wird.
Achtung: Eine Verpolung kann die Fahrzeugelektronik schädigen.
Vorsicht:
Wenn vor dem Beginn des «Showroom» Modus mehr als 10 A angezeigt werden, bedeutet dies, dass die Batterie entladen ist. Das
GYSFLASH wird automatisch einen Ladevorgang beginnen. Prüfen
Sie, ob alle elektrischen Verbraucher im Fahrzeug ausgeschaltet sind. Warten Sie, bis der Strom unter 10 A sinkt, ehe Sie die Fah-
rzeugelektronik nutzen.
"BATTERIE TAUSCHEN" MODUS (OPTIONAL)
Das GYSFLASH versorgt das Bordnetz mit einer stabilen Spannung, während des Batteriewechsels, um den Verlust von Speicherin-
halten zu vermeiden. Bei der Standardeinstellung ist dieser Modus inaktiv und erscheint nicht in der Liste der Modi. Durch das Menü
«ADVANCED MENU» ist er einstellbar (siehe Seite 23).
Einstellung:
• Anschluss:
1. Schwarze Klemme an eine blanke Stelle der Karosserie.
2. Rote Klemme so an den positiven Batterieanschluss, dass die Batterie ohne Entfernen der Klemme ausgebaut werden kann.
• Drücken Sie den START/STOP Knopf.
• Die Stromaufnahme und die nom. Spannung wird
angezeigt.
• Achten Sie beim Tausch der Batterie auf die richtige
Polarität und vermeiden Sie ein Lösen der Zangen, da
sonst Datenverlust droht.
START «BATTERIE TAUSCHEN»
BATTERIE TAUSCHEN
BATTERIE TAUSCHEN
U=12.9V I=26A12V
aAchtung: Eine Verpolung kann die Fahrzeugelektronik schädigen.
"POWER SUPPLY" MODUS (STROMVERSORGUNG) (OPTIONAL)
Der Modus für erfahrene Anwender ermöglicht die Benutzung des Ladegeräts als leistungsstarke Gleichspannungsquelle, deren Span-
nung und gelieferter Maximalstrom einstellbar ist. Bei der Standardeinstellung ist dieser Modus inaktiv und erscheint nicht in der Liste
der Modi. Durch das Menü «ADVANCED MENU» ist er einstellbar (siehe Seite 23).
Einstellung der Spannung und der Begrenzung des Stroms:
Die Spannung kann zwischen 2 und 30 V eingestellt werden und der gelieferte Maximalstrom zwischen 2 und 40 A. Bei einer Span-
nung von mehr als 16 V kann die maximale Strom nicht über 20 A eingestellt werden.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys GYSFLASH 40-12 FV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys GYSFLASH 40-12 FV in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info