625738
22
Zoom out
Zoom in
Previous page
1/57
Next page
22
GYSFLASH 30-24 HF
DE
Spannungseinstellung:
Die Spannung an der Batterie kann in Schritten von 0,1 V nach Spezikation des jeweiligen Herstellers eingestellt werden.
EINSTELLUNG «DIAG +» MODUS
6.0V
6.1V
...
7.4V
DIAG+
U=13.5V
12V
DIAG+
U=27.2V
24V
DIAG+
U=13.5V
12V
6V
12V
24V
12.0V
12.1V
...
14.8V
24.0V
24.1V
...
29.6V
Erste Schritte:
• Verbinden Sie die Ladeklemmen: rot (+) und
schwarz (-) mit der Batterie.
• Drücken Sie den START/STOP Knopf.
• Die Stromaufnahme und die mom. Spannung
wird angezeigt.
START DIAG +
I=12A
DIAG+
U=13.5V
DIAG+
U=13.5V
12V 12V
Vorsicht: Wenn zu Beginn des «Diag+» Modus mehr als 10 A Stromverbrauch angezeigt werden, bedeutet dies, dass die Batterie
entladen ist. Das GYSFLASH wird automatisch einen Ladevorgang beginnen. Prüfen Sie, ob alle elektrischen Verbraucher im Fahrzeug
ausgeschaltet sind. Warten Sie, bis der Strom unter 10 A liegt, ehe Sie die Diagnose durchführen.
"SHOWROOM" MODUS
Während der Diagnose bei Motorstillstand hält das GYSFLASH die Stromversorgung der Bordbatterie für elektrische Verbraucher
(Motorkühlung, Fensterheber, Bordelektronik, usw.) bis 30 A aufrecht (und bis 15 A bei 24 V). Es hält eine konstante Spannung von:
- 12 V bis 14,8 V (für 12 V Batterie)
- 24 V bis 29,6 V (für 24 V Batterie)
- 6 V bis 7,4 V (für 6 V Batterie).
Spannungseinstellung:
Die Spannung an der Batterie kann in Schritten von 0,1 V nach Spezikation des jeweiligen Herstellers eingestellt werden.
EINSTELLUNG «SHOWROOM» MODUS
6.0V
6.1V
...
7.4V
SHOWROOM
U=13.5V
12V
U=27.2V
24V
U=13.5V
12V
6V
12V
24V
12.0V
12.1V
...
14.8V
24.0V
24.1V
...
29.6V
SHOWROOM
SHOWROOM
Anschluss an die Batterie:
• Verbinden Sie die Ladeklemmen: rot (+) und
schwarz (-) mit der Batterie.
• Drücken Sie den START/STOP Knopf.
• Die Stromaufnahme und die mom. Spannung
wird angezeigt.
START SHOWROOM
SHOWROOM
13.5V
I=12A
SHOWROOM
U=13.5V
12V12V
Anschluss ohne Batterie (nicht empfohlen):
Es ist möglich das Fahrzeug ohne Batterie mit Strom zu versorgen, indem Sie den START/STOP Knopf für 3 Sekunden drücken. Auf
dem Display erscheint für 1 Sekunde "No battery" bevor das Fahrzeug vesorgt wird.
Achtung: Eine Verpolung kann die Fahrzeugelektronik schädigen.
Vorsicht:
Wenn vor dem Beginn des "Showroom" Modus mehr als 10 A angezeigt werden, bedeutet dies, dass die Batterie entladen wird. Das
GYSFLASH wird automatisch den Ladevorgang beginnen. Prüfen Sie, ob alle elektrischen Verbraucher im Fahrzeug ausgeschaltet sind.
Warten Sie, bis der Strom unter 10 A sinkt, ehe Sie die Fahrzeugelektronik nutzen.
"BATTERIE TAUSCHEN" MODUS (OPTIONAL)
Das GYSFLASH versorgt das Bordnetz mit einer stabilen Spannung, während des Batteriewechsels, um den Verlust von Speicherin-
halten zu
vermeiden.
Einstellung der Spannung:
Beim GYSFLASH 30-24 HF ist es möglich zwischen 6 V, 12 V oder 24 V zu wählen:
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys GYSFLASH 30-24HF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys GYSFLASH 30-24HF in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info