665732
23
Zoom out
Zoom in
Previous page
1/82
Next page
23
EXAGON 400 CC/CV
EN
1s 1s 1s
...
...
...
...
...
Back to Setup
menu
Hot Start
Hot Start
time
AntiSticking
Frequency
(MMA vertical up)
Perrcentage
(MMA vertical up)
Validate current
setting
Reset current
setting
Current
value
Current
value
Current
value
Current
value
Current
value
TROUBLESHOOTING
This device integrates a default management system. In the event of a default, error messages may be displayed.
Error code Signication CAUSES SOLUTIONS
Thermal protection
Duty cycle excessed.
Ambient temprature above 40°C.
Obstructed air input.
Wait for the indicator to turn off before resuming
welding operations.
Oserve the duty cycle and insure a good ventilation.
Using the optional anti dust lter will reduce the duty
cycle.
+
Mains voltage default.
Mains power is out of range or one phase
is missing.
Have your electrical installation checked by a quali-
ed person. The voltage between the phases must be
between 340V RMS and 460V RMS.
+
Current sensor default The current sensor is inactive or faulty.
Have the sensor's connection cables checked by a
qualied person.
+
Power relay command
default.
The power relay could not be closed.
Have the relay's command connection cables checked
by a qualied person.
+
à
No temperature informa-
tion.
The temperature sensor is off.
Have the sensors' connection cables checked by a
qualied person.
+
ou
Fan default.
One of the fans is not rotating at the right
speed.
Check that there is no foreign object obstructing the
fan, check the cabling , replace the fan.
All operations requiring the removal of the machine’s cover and checking the electrical systems must be done by a qualied technician.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys EXAGON 400 CC-CV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys EXAGON 400 CC-CV in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info