779177
5
Zoom out
Zoom in
Previous page
1/25
Next page
8 9
17.11.2021
The user is liable for any damage resulting from
nonintended use of the device.
2.1. PRODUCT DESCRIPTION/PREPARING FOR USE
1
6
2
5
3
4
1. iSUP board
2. pump
3. paddle
4. repair kit
5. ballast
6. bag
2.1.1. PUMPING AND INSTALLATION OF BALLAST
A. Unfold the board
B. Connect the pump
C. Inate without exceeding the maximum allowable
pressure (10-14 PSI)
D. Slide the ballast into the assembly place
E. Secure the ballast with a clip
F. The board is ready for use
Do not use the board in shallow water due to the risk of
damage to the ballast. Do not step on the board with the
mounted ballast while the board is on the ground.
2.1.2. DEFLATING THE BOARD AND DEINSTALLATION OF
THE BALLAST
1. plastic tip
Pumping the air – upper position of the tip
1. plastic tip
2. The valve may sometimes become loose, tighten it
with a wrench.
A
B
2
1
10~14PSI
C
D
E
F
1
2
1
1
2
121
A
B
C
D
E
F
Pumping out – lower position of the tip:
A. Unlock the ballast by pulling out the clip
B. Take out the ballast
C. Pump out the air
D. Press to let out air
E. Fold the board
F. The board is prepared for storage/transport
2.1.3. VALVE
The plastic tip in the valve serves to evacuate the air if it is
in the lower position. The upper position of the tip is used
to inate the air as well as to prevent air loss.
1. If the valve is leaking or if it is impossible to inate
the board, check the position of the plastic tip keep
it in the upper position.
3. If the valve is damaged, it must be removed and
replaced using a wrench.
2.3 CLEANING AND MAINTENANCE
Clean the product after every use.
Use a soft, damp cloth and clean water for cleaning.
The product must be stored in a cool and dry place,
protected from moisture and direct sunlight.
After each cleaning, wipe the product with a dry
cloth.
2
1
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gymrex GR-SPB365 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gymrex GR-SPB365 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info