Manual Gymrex GR-MG52 (page 22 of 97) (English, German, Danish, French, Italian, Polish, Spanish)

779086

Zoom out

Zoom in

1/97

a) Seat the stabilising fastener (5) between the side frames (1, 2). Apply the

365x60 reinforcing plate (11) on the outside of the right frame. Align the axes

of the fastener, frames and plate holes. Fix the structures with M12x80 screws,

M12 washers and M12 nuts. Slide the washer onto the fixing screw. Move it

from the outside of the frame through the hole axes. Attach with a washer and

nut from the inside.

The left frame (2) with the fastener (5) is installed in the same way.

b) Place the machine platform (3) between the side frames (1, 2). Repeat the

above-mentioned procedure to assemble all parts. Use the 180x50 reinforcing

plate (12).

Fix the main frame (4) to the lower stabilising fastener (5). For this purpose,

align the axes of the main frame and connector holes at the connection point.

Apply the 180x50 reinforcing plate (12) on the outside. Attach the upper

fastener using M12x80 screws, M12 washers and M12 nuts. Slide the washer

onto the fixing screw. Move it from the outside of the frame through the hole

axes. Attach with a washer and nut from the inside. Attach the lower fastener

using M12x70 screws, M12 washers and M12 nuts. The fixing procedure is as

above.

c) Insert the transport handle (13) into the main frame hole axis.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gymrex GR-MG52 in the language / languages: English, German, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gymrex GR-MG52 Manual

Product: