779070

Gymrex GR-MG39 Manual

6
Zoom out
Zoom in
Previous page
1/19
Next page
2. Slide the support column into the base of the
platform and then x it with the screws provided.
Attach the 2 lower handle tubes to the platform base
and tighten.
3. Place the upper parts of the handles on the lower
handle tubes. Screw together. Fix the top of the
left and right handles with 2 screws in the support
column.
4. Connect the wires from the support column to the
wires from the control panel. Place the control panel
on the support column with the wires guiding inside
the column.
By setting the mode with the MODE button, you can
choose:
• manual mode marked as „88”, in which it is possible
to freely set the time and intensity of the training
• automatic mode marked as „P0, P1, ..., P10”
Determining the BMI:
• Press the „MODE” button and select „01” for a man
or „02” for a woman.
• „01-020-00“ will be displayed. 01 means entry into
the BMI program, „020“ means age. Pressing „SPEED
^/˅“ adjusts the displayed value to the user‘s age.
Then press „TIME“ to conrm.
• Then, adjust your height and weight. The default
height and weight are 1.70 m and 70 kg. Pressing
„SPEED ^/˅“ adjusts the displayed values to your
height and weight. Then press „TIME“ to conrm.
• Place your hands on both sensors of the device after
you have entered the data. The BMI will be displayed
within 5 seconds.
Speaker: Connect the player using a dedicated cable (e.g.,
jack-to-jack cable).
3.4. CLEANING AND MAINTENANCE
a) Always unplug the device before cleaning it.
b) Use only non-corrosive cleaners to clean the surface.
c) After cleaning the device, all parts should be dried
completely before using it again.
d) Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
e) Do not spray the device with a water jet or submerge
it in water.
f) Do not allow water to get inside the device through
vents in the housing of the device.
g) The device must be regularly inspected to check its
technical eciency and spot any damage.
h) Use a soft cloth for cleaning.
i) Clean the device after each use.
DISPOSING OF USED DEVICES
Do not dispose of this device in municipal waste systems.
Hand it over to an electric and electrical device recycling
and collection point. Check the symbol on the product,
instruction manual and packaging. The plastics used to
construct the device can be recycled in accordance with
their markings. By choosing to recycle you are making
a signicant contribution to the protection of our
environment.
Contact local authorities for information on your local
recycling facility.
5. Screw the control panel to the support column
by tightening the center screw rst and nally the
side screws. Turn the drink holder into the support
column.
3.3. DEVICE USE
a) Connect the power cable to the back of the device.
b) Plug the cable into an electrical socket.
c) Turn on the power button on the back of the device
(„I“-On position).
d) Stand on the vibrating platform with your legs
spaced at shoulder width and slightly bent knees.
e) Set the selected workout program, start the exercises.
DESCRIPTION OF THE BUTTONS
AUTOMATIC MODES INTENSITY TABLE (PROGRAM/
TIME [MIN])
900S
SELECT THE WORKOUT DURATION 600s
300s
Low
Select the workout intensity: „Low” –
low, „Middle” – medium, „High” – high
Middle
High
START Start the program
STOP Stop the program
MODE Switch between programs:
TIME Dostosowywanie czasu trwania treningu
(maksymalnie 15 minut)
SPEED „˄” Zwiększanie intensywności treningu
SPEED „˅” Zmniejszanie intensywności treningu
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The device should always be used when positioned on an
even, stable, clean, reproof and dry surface, and be out
of the reach of children and persons with limited mental
and sensory functions. Position the device such that you
always have access to the power plug. The power cord
connected to the appliance must be properly grounded
and correspond to the technical details on the product
label.
ASSEMBLING THE APPLIANCE
All screws are xed in the device to avoid mistakes in
their later use. Before installing the element, they must be
screwed out.
1. Lay the base of the platform on a level surface. Pass
the long wire through the center of the support
column and connect it to the base wire. The larger
wire connector should be at the top.
1. Control panel
2. Sensor
3. Right handle
4. Left handle
5. Support column
6. Stretching line
7. Vibrating platform
8. Housing
9. Adjustable feet
10. Power socket
11. „I/O” switch
A. Display MODE
B. Display CAL/BMI
C. Display SPEED
D. Display TIME
E. 300S button
F. 500S button
G. 900S button
H. LOW button
I. MIDDLE button
J. HIGH button
K. MODE button
3. USE GUIDELINES
The device is intended to train various muscle groups
thanks to the use of the vibrations it generates and
appropriate exercises.
The product is intended for home use only!
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
CONTROL PANEL
1
2
3
5
6
7
8
9
4
10 11
L. SPEED “˄” button
M. STOP button
N. START button
O. SPEED “˅” button
P. TIME button
10 11
05.11.2021
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gymrex GR-MG39 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gymrex GR-MG39 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info