779056
21
Zoom out
Zoom in
Previous page
1/100
Next page
e) At the contact points of the backrest support frame (7) and the side machine
frames (1.2), align the hole axes. Fasten the assembly with M12x140 screws,
M12 washers and M12 locknuts. To do this, insert a washer onto main fixing
screw. Insert a screw with a washer into the upper hole axis, and then secure
it from the bottom with a washer and nut. Repeat the procedure for all holes.
STEP II
a) Fix the training handle arm (8) and the load arm (10) to the left side frame.
Fasten the training handle arm (8) on both sides with bearing washers and
M8x20 screws. Fasten the load arm (10) on the outside of the machine
with a bearing washer and M8x35 screw. On the inside, fix it with a bearing
washer and M8x20 screw.
b) Connect the training handle arms and load arms using a power fastener
(9). Slide an M10 washer onto an M10x20 screw and attach it. Repeat the
procedure for all holes.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gymrex GR-MG 63 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gymrex GR-MG 63 in the language / languages: English, German, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info