779034
22
Zoom out
Zoom in
Previous page
1/109
Next page
a) Fix the fasteners (4, 5) to the side support frame frames (1, 2). For this purpose,
use M12x135 screws, M12 washers and M12 safety nuts.
Slide the washer onto the fastening screw. Align the axes of the support frame
base and fastener holes. Insert the previously prepared mount into the hole
axis, from the outside. Secure with a washer and nut from the inside. Repeat
the procedure for all holes.
b) Place the main frame (6) on fasteners (4, 5) by aligning the holes. Fasten with
M12x135 screws, M12 washers and M12 locknuts. Guide the screw from the
floor upwards. Fasten using the procedure described in item b). Repeat the
procedure for all holes.
c) Place the footrest (7) in the lower section of the main frame. Align the axes of
frame mounting plate and footrest holes. Fasten with M12x30 screws, M12
washers and M12 locknuts. Guide the screw from the outside. Fasten using the
procedure described in item b) (see the drawing).
d) Fix the load holder (3) to the side frame (2) using M12x75 screws, M12 washers
and M12 locknuts. Guide the screw from the inside of the frame. Fasten using
the procedure described in item b) (see the drawing).
e) Use the same procedure to fix the load holder (3) to the side frame (1).
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gymrex GR-MG 60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gymrex GR-MG 60 in the language / languages: English, German, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info