779054
23
Zoom out
Zoom in
Previous page
1/109
Next page
e) At the contact point of the backrest bracket (8) and the main frame (7), guide
the fasteners from the top. Fasten with M12x110 bolts, M12 washers and M12
locknuts. Fasten using the procedure described in item a) (see the drawing).
STEP II
a) Fix the left training arm (9) to the side support frame mounting plates (1). To
do this, align the hole axes. Pass the rotating roller through the hole. Secure
the arm on both sides with bearing washers and M8x20 screws.
b) Install the right training arm in the same way.
c) Fix the training load holders (10) to the training arms. To do this, insert the
holders into the middle hole axes. On the inside of the arm, attach with an M8
washer and M8x30 screw. Finally, fix the cap.
f) Fix the left and right (11) load holder to the side support frames of the
machine. Fasten with M12x75 screws, M12 washers and M12 nuts. Guide the
screws from the inside of the side support frames. Fasten using the procedure
described in STEP I, item a) (see the drawing).
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gymrex GR-MG 59 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gymrex GR-MG 59 in the language / languages: English, German, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info