779088
21
Zoom out
Zoom in
Previous page
1/102
Next page
a) Seat the stabilising fastener (3) between the side frames (1, 2). Apply the
365x60 reinforcing plate (7) on the outside of the right frame (1). Align the axes
of the fastener, frames and plate holes. Fix the structures with M12x80 screws,
M12 washers and M12 nuts. Slide the washer onto the fixing screw. Move it
from the outside of the frame through the hole axes. Attach with a washer and
nut from the inside.
The left frame (2) with the fastener (3) is installed in the same way.
b) Fix the main frame (4) to the lower stabilising fastener (3). For this purpose,
align the axes of the main frame and connector holes at the connection point.
Apply the 180x50 reinforcing plate (6) on the outside. Attach the upper fastener
using M12x80 screws, M12 washers and M12 nuts. Slide the washer onto the
fixing screw. Move it from the outside of the frame through the hole axes.
Attach with a washer and nut from the inside. Attach the lower fastener using
M12x70 screws, M12 washers and M12 nuts. The fixing procedure is as above.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gymrex GR-MG 51 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gymrex GR-MG 51 in the language / languages: English, German, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info