Manual Gutmann Stratos (page 28 of 68) (English, German, Dutch, French, Italian, Spanish)

668875

Zoom out

Zoom in

1/68

Attention: do not use 3-phase-cleaners or

clean the filter in a commercial dishwasher.

The use of aggressive cleaners like fuel,

acetone, trichlorethylene destroys the filter!

Reinstate the metal filter after the cleaning.

By models using the “Perimeter Extraction”

method the pane has to be brought

afterwards in its original position. Therefore

please press the pane with both hands

upwards to a certain extent (lock in of the

pane).

Exchange of the active carbon

filter

(only extractor hoods with circular air – version D)

Active carbon filters bundle up odorous

substances which are contained in the

kitchen fume. According to the strain of work

this filter has to be exchanged after 3-6

months.

The active carbon filter is often mounted on

a frame sitting below the ventilator module.

For the exchange of the active carbon filter

turn both black toggle screws around 90

degrees. After flapping down the pane and

Cleaning and care

Cleaning of the surface

Risk of electric shock! Please separate the

extractor hood from the power supply

network by pulling the plug or the

disconnection of the fuse. Please pay

attention to the fact that no water seeps into

the appliance during the cleaning process.

Untimely cleaning of the surface saves later

a troublesome removing of stubborn

soiling. For the cleaning use only

commercial detergent or all-purpose

cleaners which are suitable for stainless

steel / aluminium.

Please do not use

scouring agents or steel wool! After the

cleaning of the extractor hood please tend

the stainless steel surfaces with a high-

grade steel-care product.

Only with a light soapy water and a very soft

cloth varnished surfaces have to be

cleaned. Please clean the switch panel only

with a soft and damp-dry cloth.

By extractor hoods with a pane beneath the

metal grease filter (“Perimeter Extraction”)

fatty deposits can occur on the edge of the

pane. These deposits are founded

physically and represent no dysfunction of

the extractor hood. Please clean the pane

beneath the filter regularly to prevent

stubborn soiling.

Exchange and cleaning of the

filter

Fire risk! The performance of the extractor

hood is affected by containing fat remains

and therefore the fire risk increases. To

prevent a fire risk please clean the metal

filter regularly. The metal grease filter must

be cleaned every 2 weeks at last.

By models with a pane beneath the filter

(“Perimeter Extraction”) the pane has to be

removed at first. For this swing at first the

small front glass pane with one hand

upwards and then take the filter out at its

grip. The metal grease filter is fixed by a

magnet. The installation is made in reverse

order.

The metal grease filter is to be cleaned at

best in a dishwasher or in hot soapy water.

Aggressive cleaners should not be used.

The guarantee can´t be applied if a

discolouring on the filter is a result of using

an aggressive dishwashing liquid. Please

avoid temperatures over 65 degrees.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gutmann Stratos in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gutmann Stratos Manual

Product: