Manual Gutmann Noche (page 23 of 52) (English, German, Dutch, Danish, French, Italian, Spanish)

668861

Zoom out

Zoom in

1/52

Display grease filter cleaning

The filter needs cleaning when the filter

cleaning symbol is flashing. Touch the filter

cleaning symbol field for at least 5 seconds

until the indicator lamp goes out. The

grease filter indicator is activated after max.

15 operating hours or every two weeks(even

if no cooking operations take place).

Cleaning and care

Clean surfaces

Danger due to electric shock! Disconnect

the extractor hood from the power supply

by pulling the plug out of the socket or by

switching the fuse off. When cleaning,

make sure that no water penetrates the

device. Timely cleaning of the surface saves

the later laborious removal of stubborn

contamination. Only use conventional

detergents or universal cleaning agents for

cleaning suitable for stainless steel/

aluminium. Never use abrasive cleaning

agents or steel wool. After cleaning the

hood, treat the stainless steel surfaces with

a stainless steel care product.

Only clean painted surfaces with a mild

detergent solution and a very soft cloth. Only

clean the operating panel with a soft damp

cloth.

For hoods having a panel below the filter

(edge extraction) grease deposits occur at

the edge of the panel. These deposits occur

for physical reasons and do not imply a

malfunction of the hood. Please clean the

panel underneath the filter regularly to

prevent stubborn residue contamination.

Cleaning and care information When

cleaning the grease filters, also clean the

accessible housing components of grease

deposits. This prevents a fire hazard and

optimum function is maintained.

Use hot soapy water or a mild window

cleaning agent to clean the hood.

Do not scratch off baked-on deposits, but

soften them using a damp cloth.

Do not use abrasive agents or scouring

pads.

Note: Do not use alcohol (spirits) on plastic

surfaces, as dull spots may result.

Caution! Ventilate the kitchen sufficiently, no

open flame.

Only clean the operating panel with a soft

damp cloth (mild detergent solution). Do

not use stainless steel cleaners for the

sliding switch/pressure switch.

Stainless steel surfaces:

Use a mild and non-abrasive stainless

steel cleaning agent. DO not clean

stainless steel surfaces with abrasive

scouring pads or with cleaning agents

containing sand, soda, acid or chloride!

Clean in direction of grind only.

We recommend our stainless steel clea-

ner no. 461731. Order address see

enclosed service booklet.

Aluminium, varnished and plastic

surfaces:

Use a soft, lint-free window or microfibre

cloth.

Do not use dry cloths. Use a mild window

cleaning agent.

Do not use aggressive cleaning agents or

agents containing acid or lye.

Do not use scouring agents.

Clean/dismantle the metal

filters

Fire hazard! The performance of the

extractor hood is reduced by grease

residues and the fire hazard increases. In

order to prevent a fire hazard, please make

sure to clean the metal filters regularly. The

metal grease filters must be cleaned at

least every two weeks.

The safety glass panel must first be folded

out for these hood models with metal filter

(full-surface extraction). To do so, grip the

panel by the handles with both hands and

pull slowly downwards until the magnetic

contact releases, then lower it. Now grip

the metal filter by the handles with both

hands and pull down until the magnet

contact releases. The filter can now be

removed. Installation takes place in reverse

order.

fan motor off

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gutmann Noche in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 1,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gutmann Noche Manual

Product: