Manual Gutmann Facil (page 21 of 40) (English, German, Dutch, French, Italian, Spanish)

668866

Zoom out

Zoom in

1/40

Subject to technical modifications!

Transport, unpacking, installation

Condensation may occur if the appliance

is brought into the installation site from a

cold environment. Please wait until the

appliance has adjusted to the temperature

and is completely dry before operating it.

The acclimatization period depends on the

temperature difference and the type and

design of the appliance. However, it should

be at least 12 hours.

Connecting the power supply

Check that the rated voltage indicated on

the appliance matches the mains voltage

in your area. Connection to the incorrect

voltage will damage or destroy the

appliance.

Before switching on the appliance, check

that all cables and lines are properly fitted

and undamaged. Make sure in particular

that there are no kinks in the cables, that

they are not pulled too tightly around corners

and that no objects are resting on them.

Also make sure that all plug connections

are securely inserted. Faulty shielding or

wiring poses a health hazard (electric

shock) and can destroy other appliances.

Appliances with mains plugs are fitted with

a safety-tested mains cable for the

respective country of use and may only be

connected to a correctly earthed safety so-

cket. Otherwise, there is a risk of electric

shock. Make sure that the socket on the

appliance or the domestic safety socket is

easily accessible so that the mains cable

can be unplugged from the socket in an

emergency or during servicing and

maintenance work.

Danger of electric shock!

Do not clean the hood with a steam clea-

ner or water pressure cleaner. The hood

must be disconnected from the power

supply prior to cleaning.

General functionality

The extractor hood has been developed

especially for the extraction of cooking

vapours for use in the private home.The

arised cooking vapours are catched by the

extractor hood and absorbed by the metal

grease filter (version D is add. equipped

with an active carbon filter).

The filters are held in the hood body by

magnets. By some models the filter is

covered by a pane. The accruing extraction

at the edge of the pane (“Perimeter

Extraction”) allows a very effective fume

absorption.The access to the filters is

guaranteed by models using the “Perime-

ter Extraction” method through the swinging

of the pane. The exhaust power is controlled

over the switch panel. Among the lighting

additional options are also controlled over

the switch panel by some extractor

hoods.The illumination of the cooking zone

is taken over by several halogen spotlights.

The extractor hood is produced of stainless

steel or aluminium.

1 Upper chimney

2 Lower chimney

3 Switch panel

4 Metal grease filter

5 Lighting

6 Hood body

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gutmann Facil in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gutmann Facil Manual

Product: