Manual Gutmann Capa (page 14 of 24) (English, German, Dutch)

651760

Zoom out

Zoom in

1/24

residues and the fire hazard increases.

To prevent a fire hazard, you must clean

the filters regularly. The grease filters

must be cleaned at the least once a

fortnight. To do this, grip the metal filter

with both hands at the top and bottom

and pull forward until the magnet con-

tact releases. You can now remove the

metal filter.

Installation in reverse order.

Cleaning the filters

The stainless steel filter is best cleaned

in the dishwasher or with a mild dish-

washing agent. The manufacturer ac-

cepts no liability whatsoever for any

discolouration caused by the use of ag-

gressive dishwashing agents. Tempera-

tures exceeding 65 degrees Celsius

must be avoided.

Caution: Do not use three-phase clean-

ing agents or clean the filter in a com-

mercial dishwasher. Cleaning with ag-

gressive agents such as petrol, acetone,

tri-chlor-ethylene, etc. will destroy the

filters! Refit the metal filters after clean-

ing.

Replacing activated carbon filter

(only for hoods with recirculation, C-Version)

The activated carbon filters bind odours

in kitchen vapour. Depending on strain,

these filters must be replaced or regen-

erated after no more than 6 months. The

activated carbon filter is installed in a

frame to the left and right of the ventila-

tion module in the upper hood body. To

replace it, the metal filters must be taken

out and the hood swivelled down (on

this, see section "Replacing the metal

filter" + "Lighting replacement"). For this,

the lower body of the hood must be

swivelled down. Turn out the two screws

at the upper body of the hood and se-

cure the lower body of the hood with

one hand. After removing the two

screws, swivel down the lower body of

the hood slowly. The activated carbon

filters are kept in the upper hood body

with toggle locks. For replacement,

loosen the toggle locks and remove the

activated carbon filters diagonally down-

wards. Installation is performed in re-

verse order. Important: The activated

carbon filter must not be cleaned wet.

See sep. instructions "activated carbon".

Lighting replacement

(C-Version)

Defective luminaires must be replaced

without delay. Before exchanging the

luminaires, power down the extractor

Hi,
We have Capa ceiling extractor at our kitchen. The extractor itself works well, when controlled manually. The probelm is, that neither of the two remote controls do not work. I have already tried to switch the batteries, but without results. Is there any way to re-calibrate the remote controls? Didn't find any information from the manual. Submitted on 23-5-2021 at 12:50
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gutmann Capa in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gutmann Capa Manual

Product: