717135

Gutfels LR67013 Manual

19
Zoom out
Zoom in
Previous page
1/38
Next page
Cotton Swab
34
5. Particulate sensor (approximately once every two months).
Wipe the lens with a dry cotton swab periodically to remove any dirt. (Moisture or
tobacco smoke residue may cause it to no longer work properly). First remove the
particulate sensor cover, use a dry cotton swab to wipe the lens.
-Do not insert the cotton swab into any area other than the lens.
-Be sure to unplug the power cord.
-If you are unable to see clearly, please use a light.
※Friendly Reminders:
-Before cleaning and maintenance, unplug the power cord.
-Do not operate the machine in absence of a filter. It will not be able to remove
the dust. Dust taken into the machine may cause malfunction.
-When not using the machine for a long period of time, please unplug it. Power is
also consumed while in standby mode.
-You may need to replace filters sooner depending on where and how you use the
appliance (such as a household with a large smoking population or areas with
higher air pollution). Replace the filter if filtration is not noticeable.
33
Filter/Dust Sensor/Anion Producer
Cleaning and Maintenance
1. Pre-filter (approximately twice per month)
-Clean the surface of the filter with a vacuum cleaner or wash with
water. Allow to dry thoroughly.
2. Cellular -Activated Carbon, cold catalyst filter (approximately once
every two months)
-Clean the dust from the front of the filter with a vacuum cleaner.
-Place the filter in a ventilated area, this will allow harmful gasses
and germs to dissipate. Do not place under too much sun
exposure.
-The filter is delicate. Do not press too hard on the filter while
vacuuming.
-Do not use water to clean this filter.
3. Antibacterial cotton, HEPA filter (approximately once every two months)
-Place the filter in a ventilated area, this will allow harmful
gasses and germs to dissipate. Do not place under too much sun
exposure.
-Do not use water to clean this filter.
4. Anion producer cleaning and maintenance.
-When you hear the machine produce a creaking sound,
use a #1 or #2 paintbrush as a cleaning tool. Insert the
brush from the ventilation window above the anion
emission head.
Regularly clean the dust all aroundthe emission head.
Pinsel
Fresh Air Healthy Life
ENG
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gutfels LR67013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gutfels LR67013 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info