EN
Page | 26
Activating / deactivating
the timer
Set the operating time
1. With the mobile air conditioner in
operation, press button “C”.
2. Set the desired operating time
between 0.5 and 24 hours with
buttons “F”.
3. The set time appears on the display.
Set the starting time
1. With the mobile air conditioner in
stand-by mode, press button “C”.
2. Repeat the steps described under:
“Set the operating time”
As soon as the set time has elapsed,
the mobile air conditioner switches
on or off automatically.
NOTE
Select the time between 0 and 10 hours
in 0.5 hour steps, between 10 and 24
hours in 1 hour steps.
13.2 Water drain hose
Note that the water drain hose
connected to the mobile air conditioner
must not run higher than the position of
the hose connection on the mobile air
conditioner at any point. Otherwise,
condensation may flow back into the
mobile air conditioner and damage the
appliance.
Disconnect the mobile air conditioner
from the mains power supply before
installing the water drain hose.
Connecting the direct water drain
(see Fig. 2)
3. Remove the screw cap and water
plug on the rear (middle) of the
appliance from the drain hole.
4. Attach the water drain hose to the
connection.
Connecting the floor tray drain (see
Fig. 2)
1. Remove the screw cap and water
plug on the rear (bottom) of the
appliance from the drain hole.
2. Attach the water drain hose to the
connection.
Route the free end of the water drain
hose into a suitable drain or container
into which the condensation is to drain.
NOTE
If the internal water tank is full, the
appliance automatically switches to
emergency stop. “P1” lights up on the
display.
13.3 Set fan speed
Set the fan speed between low,
medium, high or AUTO (Automatic) with
button “G”.
13.4 Description of the
operating modes
Select the operating mode between
COOL, DRY, FAN and AUTO with buttons
“E” on the appliance.
COOL / cooling mode
• Set temperature and fan speed.
• All functions are available.
FAN / ventilation mode
• Compressor does not run.
• Set the fan speed.
• The temperature cannot be set.
• All other functions are available.
DRY / dehumidification mode
• The appliance starts automatically
in cooling mode with 25°C and the
lowest fan speed.
• Temperature and fan speed cannot
be altered.
• All other functions are available.
AUTO / automatic mode
• The appliance starts automatically
in cooling mode with 24°C.
• Fan speed and temperature cannot
be altered.
