EN
Page | 31
13.1 Setting the SLEEP
function
1. With the appliance in COOL
mode, start the SLEEP
function with button “b”
(SLEEP).
2. The fan runs at the lowest
speed and the temperature is
controlled for max. 8 hours.
3. 0 – 2 hours: Increase by 1°C
per hour.
4. 2 - 4 hours: Temperature is
kept constant.
5. 6 - 8 hours: Decrease the
temperature by 1°C per hour.
NOTE
The function is only available in
cooling mode.
Using the SWING function
Setting of the air flow for a more
comfortable and better air
circulation.
1. Activate the SWING function with
button “a”.
2. The air flow direction (louvres)
moves from left to right.
3. Fix the air flow direction
(louvres) in the respective
position by pressing button “a”
again.
13.2 MODE description
Select the operating mode between
FAN, DEHUM, COOL and AUTO with
button “d” (MODE).
When changing from COOL to
DEHUM mode (and vice versa),
allow an ON/OFF interval of 3
minutes.
FAN – ventilation mode
• Set the fan speed with button
“h” (SPEED).
DEHUM
• The appliance automatically
lowers the current room
temperature (between 16°C and
31°C) by 2°C.
• The fan speed is automatically
set to “low” (LOW).
COOL – cooling mode
• Set the temperature 16°C and
31°C with buttons “e/g”
(DOWN/UP).
• Set the fan speed with button
“h” (SPEED).
Setting the fan speeds
Set the fan speed to low (LOW),
medium (MEDIUM) or high (HIGH)
with button “h” (SPEED).
Water tank alarm function
The water tray inside the mobile air
conditioner has a water level safety
switch which monitors the water
level. When the water level reaches
an expected height, the indicator
light “j” (FULL) comes on.
13.3 Connecting water drain
hose
Note that the water drain hose
connected to the mobile air
conditioner must not run higher than
the position of the hose connection
on the mobile air conditioner at any
point, as otherwise condensation
may flow back into the mobile air
conditioner and damage the
appliance.
Disconnect the mobile air
conditioner from the mains power
supply before installing the water
drain hose.
