776223
19
Zoom out
Zoom in
Previous page
1/28
Next page
User Manual
16
To delete the selected image:
Press the softkey labeled Delete,
Press the softkey labeled Yes”.
To delete all the images in SD card:
Press the softkey labeled “File”,
Select “Del All” by pressing softkey labeled “” and “”, and “OK” to confirm.
Press the softkey labeled Yes”.
Voice Annotation
Voice annotation can only be added before saving an image. When freeze an image, the Image Capture menu appears.
To add a voice annotation to the image:
Press the softkey labeled Voice”.
Press the softkey labeled Recordto start the recording.
To Stop recording, press the softkey labeled Stop. Up to 60 seconds of voice annotation can be recorded for each
image. Once it reaches 60 seconds, recording will stop automatically.
Press the softkey labeled Playto replay the voice annotation before saving.
Press the softkey labeled Saveto save the video annotation.
How to get accurate temperature?
There are a lot of factors affecting temperature accuracy.
Here is a brief introduction to some typical parameters: emissivity, background temperature, distance, humidity and etc.
Note:
To get accurate temperature, you shall hold the camera stably and focus the camera well.
Emissivity: All objects radiate infrared energy. The amount of energy radiated is based on two primary factors: the
surface temperature of the object and the emissivity of object’s surface.
The default emissivity is 0.98, which is applicable to most surfaces.
For some special materials or surfaces, please refer to the emissivity table to find a right emissivity value.
You can change emissivity between 0.01 and 1.00 in menu Parameter and Emiss.
Tamb: To display and adjust the real-time comparative scene temperature of target. The default setting of this
parameter is automatic adjusted by the internal temperature sensor. If needed, this setting can be adjusted
manually according to real temperature of some special scenes (like sky or snow) of measured target.
Press button and button to bring the submenu of parameter setting, then choose Tamband select
Set option to set the value manually by pressing button and button . The new measurement will be
based on the saved tamb value until re-enter Tamb option and exit, which will activate the default automatic mode.
Distance: To set the proper distance from target, the distance range is from 0.1 meter to 30 meters.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Guide EasIR-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Guide EasIR-4 in the language / languages: English as an attachment in your email.

The manual is 1.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Guide EasIR-4

Guide EasIR-4 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info