776226
15
Zoom out
Zoom in
Previous page
1/18
Next page
User Manual
12
Changing the Temperature Units
The EASIR-0 will display temperature in Fahrenheit or Celsius. To change the temperature units:
Press to display main menu
Press the softkey labeled Setup
Press the softkey labeled Tunit
Press for Celsius or for Fahrenheit.
Doing spot analysis
EASIR-0 supports single spot measurement. The location of center spot can be adjusted in live image:
Press button and then button to bring location adjustment mode of center spot.
The default adjustment mode is Left/Right mode, press and can move the center spot to left and
right under this mode; press P button to switch into Up/Down mode, then press and can move the
center spot to up and down under this mode. Press P button can switch between the above two modes freely.
Press “trigger” button can save and exit the location adjustment mode of center spot.
How to get accurate temperature?
There are a lot of factors affecting temperature accuracy.
Here is a brief introduction to some typical parameters: emissivity, background temperature, distance, humidity and etc.
Note:
To get accurate temperature, you shall hold the camera stably and focus the camera well.
Emissivity: All objects radiate infrared energy. The amount of energy radiated is based on two primary factors: the
surface temperature of the object and the emissivity of objects surface.
The default emissivity is 0.98, which is applicable to most surfaces.
For some special materials or surfaces, please refer to the emissivity table to find a right emissivity value.
You can change emissivity between 0.01 and 1.00 in menu Para and Emissivity.
Tamb: To display and adjust the real-time comparative scene temperature of target. The default setting of this
parameter is automatic adjusted by the internal temperature sensor. If needed, this setting can be adjusted
manually according to real temperature of some special scenes (like sky or snow) of measured target.
Press button and button to bring the submenu of parameter setting, then choose Tamb and select
Set option to set the value manually by press button and button. The new measurement will be
based on the saved tamb value until re-enter the Tamb option and exit, which will activate the default automatic
mode.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Guide EasIR-0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Guide EasIR-0 in the language / languages: English as an attachment in your email.

The manual is 0.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info