Manual Gude TK 2500 55187 (page 31 of 96) (English, German, Dutch, French, Italian)

624761

Zoom out

Zoom in

1/96

TK 2500

English

Read and understand the operating instructions

before using the appliance. Abide by all the safety

measures stated in the service manual. Act responsib-

ly toward third parties.

In case of any doubts about connection and operati-

on refer please to our customer center

Specied Conditions Of Use

The circular saw is only intended to cut wood and

wood like products.

Do not use this product in any other way as stated for

normal use.

Not observing general regulations in force and

instructions from this manual does not make the

manufacturer liable for damages.

Requirements for operating sta

The operating sta must carefully read the Opera-

tingInstructions before using the appliance.

Because wrong using of the appliance can be risky,

only competent persons are allowed to operated it.

Operator must be trained properly concerning adjust-

ment, operation and appliance using.

Qualication:: Apart from the detailed instructions

by aprofessional, no special qualication is necessary

forappliance using.

Minimum age:: Persons over 18 years of age can

only workon the appliance.An exception includes

youngsters trained in order to reachknowledge

under supervision of the trainer duringoccupational

education.

Technical Data

The values stated are emission values and as such do not necessarily constitute values which are safe for the

workplace. Al- though there is a correlation between emission levels and environmental impact levels, whether

further precautions are neces- sary cannot be derived from this. Factors inuencing the actually present environ-

mental impact level in the workplace include the characteristics of the work area and other noise sources, i.e. the

number of machines and other neighbouring work process- es. The permitted workplace values can likewise vary

from country to country. This information is intended to assist the user in estimating hazards and risks.

Theappliance meets EN 61000-3-11 requirements and is subject to specialconnection conditions. That means

that use on optionally selectedconnection points is inadmissible. Theappliance can lead to occasional voltage

uctuations underunfavourable power conditions. Theappliance is only designated to be used for connection

points notexceeding the maximum allowed impedance of Zmax=0,233 . Asa user, you must make sure your

connection point on which you wantto use the appliance meets the above-mentioned requirements –after

agreement with your electricity supplier ifnecessary.

Circular table saw ..................................................................................................................................... TK 2500

Art. No ....................................................................................................................................................................................................55187

Service connection ...................................................................................................................................................230 V/ 50 Hz

Rated input ............................................................................................................................................................................2200 W

Idle speed ........................................................................................................................................................................4700 min

-1

Saw blade dia. x hole dia ...................................................................................................................................... 250 x 30 mm, HM 36 Z

Cutting depth max. 90° ......................................................................................................................................................74 mm

Cutting depth max. 45° ......................................................................................................................................................63 mm

Weight .........................................................................................................................................................................................20 kg

Dimensions LxWxH (in mm) ................................................................................................................900 x 690 x 1035 mm

Noise and Vibration Information

Sound pressure level L

1), 2)

....................................................................................................................................................94,8 dB (A)

Guaranteed sound power level L

................................................................................................................................ 107,8 dB (A)

Wear ear protectors!

Measured according to EN ISO 11202:1995/AC:1997,

under load, Uncertainty K=3 dB (A)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude TK 2500 55187 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 10,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude TK 2500 55187 Manual

Product: