626577

Gude SET 5 IN 1 94081 Manual

40
Zoom out
Zoom in
Previous page
1/267
Next page
GB
• Always move forward only at work .
• Working on slopes, advance across, never up and down. Be very careful when changing the
direction .
• The blades should not be running when ungrassy areas are crossed and when moving from a site
to another one.
Refine soil already spud !
6.4.4 Bush Shears Operating Instructions
• Use the unit only after you have read the instruction manual carefully .
• Observe all the safety instructions contained in the manual .
• Hedge scissors may be used not only on hedges but also to cut shrubs. .
• The best cutting output may be obtained when the scissors are conducted at an approximate angle of
15° to the hedge .
• To obtain an even height of the hedgerow, it is recommended to have a conducting cord stretched
along the hedge. Any branched beyond the line will be cut off. .
• Side surface area of the hedge will be trimmed by arched movements from down upwards.
6.5 Step-by-Step Instructions
• Remove any foreign objects from the ground to be treated.
• Put appropriate protection clothing on .
• Start the unit according to the description in chapter “Operation”.
• Observe all the relevant safety instructions .
• Clean the unit after every use and check all the integrated tools and protection devices for damages.
7 Troubles-Causes-Troubleshooting
Trouble Cause Troubleshooting
The engine will not
start
1. Empty tank
2. The engine is flooded
3. Fouled plug, (the carbon residues
on electrodes) too big distance
between the electrodes.
4. Fouled carburettor or carburettor
jets.
5. Damaged plug connection or
ignition cable.
6. Ignition spark missing
1. fill up the tank
2. Close the throttle, try starting several
times, remove the ignition plug if
necessary and dry it.
3. Clean the plug, check the thermal value
and replace it if necessary
Set 0.6-0.7 mm
4. Clean the carburettor blow it off
5. Replace
6. Check short-circuit knob, the cable
ignition module and replace if
necessary.
Adjust the gap (0,3-0,4 mm).
When idling, the
engine is too fast
1. Cold engine
11. Heat up slowly, turn down the choke if
necessary .
The engine will not
reach the maximum
output
1. Fouled plug, (the carbon
residues on electrodes) too big
distance between the
electrodes.
2. Fouled carburettor or
carburettor jets.
3. Fouled air filter
4. Exhaust, exhaust pipe
5. The packing ring in the
1. Clean the plug, check the thermal value
and replace it if necessary
Set 0.6-0.7 mm
5. Clean the carburettor blow it off
2. Clean
3. Remove the exhaust pipe, clean and
remove carbon residues.
4. Replace
39
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude SET 5 IN 1 94081 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude SET 5 IN 1 94081 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info