626577

Gude SET 5 IN 1 94081 Manual

36
Zoom out
Zoom in
Previous page
1/267
Next page
GB
Before starting the set, make sure that the integrated tools are fitted on the driving unit correctly and that the
moving parts of the machine run freely. .
Warning ! If in doubt, require assistance of an expert from the authorised servicing centre . Laic advice may
be dangerous to life !
1.
CAUTION! Held your hands and legs out of the reach of the integrated tool, mainly when the
machine is being started. Always have your hand on the additional handle lightly .
Always use the machine with the carrying strap supplied. Hld one hand on the engine handle and the
other one in the axle handle.
2. Always hold the unit at an appropriate safe distance from the body and take a stable posture. .
3. Always use a face shield .
4. Use the machine at daylight only.
5. Do not use the machine in rain or on wet grass
6. Check the machine after a stroke for possible damages and have it repaired if necessary .
7. Do not use the machine if the protection devices are damaged or installed incorrectly .
8. Make sure that the engine vents are free of any dirt and remnants .
9. In the course of work procedure, make sure that nopersons or animals are standing within 10 m
diameter . Switch the machine off immediately if anybody, cildren in the first place, enter the
reach of machine.
10. Using the set, stones or other parts may be thrown away and may cause serious injuries.
11. Do not get close to moving parts (where they have cutting devices – integrated bush clipper)
12. Before using the tool, the work area must be cleared from any stone, branches and other solid material
13. After the cutting fibre is extended, maximum attention is required (engine scythe) . Having
accomplished the procedure reclaim the correct working position before the machine is out in operation
again. .
14. Do not use metal cutting coils. .
15. Pay attention to the machine running for another five seconds after relieving the switch. .
6 Operation
6.1 Starting 5 in1 Garden Tools Set
Start the set of tools only after an integrated piece has been connected !
Fig. 16
Put the operating switch at position I.
Fig. 17
Put the starting carburetor lever in position Start.
35
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude SET 5 IN 1 94081 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude SET 5 IN 1 94081 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info