Manual Gude SET 380-10-50 KR 15 TLG - 71175 (page 13 of 57) (English, German, Dutch, French, Italian)

621532

Zoom out

Zoom in

1/57

• This device corresponds to all appropriate safety

regulations. Repairs may only be executed by

qualified electricians in authorised service repair

centres while using original spare parts. Failing to

observe this regulation may lead to an accident.

Emergency Action

Apply the first aid adequate to the injury and get qualified

medical assistance as quickly as possible. Protect the

injured person from more accidents and calm him/her

down.

For the sake of eventual accident, in accordance with

DIN 13164, a workplace has to be fitted with a first-aid

kit. It is essential to replace any used material in the

first-aid kit immediately after it has been used. If you

seek help, state the following pieces of information:

1. Accident site

2. Accident type

3. Number of injured persons

4. Injury type(s)

Using the appliance as designated

The compressor has exclusively been designed for the

production and accumulation of compressed air.

The compressed air is only suitable for pneumatic tools

/appliances/ of a machine. Any other use is conflict with

the compressor designation.

Residual Dangers

Direct electric contact

A faulty cable or faulty connector plug may lead to a

fatal accident caused by electric current.

Have always the faulty cables and connector plugs

replaced at a specialist. Use the device at a connector

equipped with current protector (RCD) only.

Indirect electric contact

Injury by parts of the machine that are live or by

faulty constructional elements of the machine.

Always pull the connector plug out of socket at

maintenance works. Operate with current protector only.

Insufficient local lighting

Insufficient lighting represents a high safety risk.

Always ensure sufficient lighting at work with this device.

Disposal

Instructions for disposal result from icons on the device,

or more precisely, on the package. Description of each

meaning can be found in the “Marking“ chapter.

Operating Staff Requirements

The operating staff must thoroughly read the operating

instructions before using the machine.

Qualification

No additional qualification is needed for using the device

apart from detailed training by a person with expert

knowledge.

Minimum Age

The device may only be operated by persons that have

reached 16 years of age.

An exception includes device use by juveniles within job

preparation for purpose of reaching skills under

instructor's supervision.

Training

Appropriate training is only needed for device use. No special

training is necessary.

Transportation and Storage

• If the device is stored for a longer period of time it needs to

be thoroughly cleaned and stored so that it was not

accessible to unauthorised persons.

• The compressor must never be stored or transported laying

or under pressure!

• Pressure in the air jet may be reduced at compressed air

cooling.

Assembly / First Putting into Operation

If the compressor is supplied without wheels assemble it with a

screw wrench according to pic. 2. The sequence of screws, nuts

and washers is evident from pic. 2. In case of need, a rubber foot

also needs to be screwed on. Jointing materials, such as screws,

nuts, etc. are included in the supply.

Visser le filtre à air sur les deux côtés dans le thread approprié

(12).

Transport stopper of the oil tank needs to be exchanged for

throat for oil adding and correct oil level needs to be ensured

(see the "Handling Throat for Oil Adding and Oil Level

Inspection" chapter) before putting the compressor into

operation)

Check the oil level at every startup (pic. 3).

Handling

The compressor may be put into operation after reading and

understanding the general safety instructions and safety

instructions. Proceed as follows:

Switching the appliance on

• Connect the compressor power cord to the electrical

network.

• Pull the switch (1) up.

• The compressor is fitted with an automatic pressure switch

that switches the compressor off after reaching the upper

operating pressure and switches it automatically on again

when air is needed again. Switching pressure 6 bar, max.

pressure 8 bar.

Operating pressure control

• The operating pressure can be set in an easy way. If turning

the knob (2) in the + direction, the operating pressure

increases. If turning in the – direction, the operating pressure

decreases. The operating pressure can be fixed by

tightening the lock ring.

• The compressor is fitted with an automatic safety valve that

releases pressure in case of overpressure. The air nozzle

can be depressurized manually by pulling the ring on the

valve (10).

Switching the appliance off

• The compressor must always be switched off by the switch

(1) and when you do not intend to use the appliance then

disconnect it from mains.

Remove the transport oil peg, add oil to the neck and make sure

there is appropriate oil level, using the oil gauge included in the

supply.

The filter insert should be cleaned from time to time. Remove the

foam filter. It can be cleaned by warm soap water solution. Dry

the foam filter and refit it.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude SET 380-10-50 KR 15 TLG - 71175 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude SET 380-10-50 KR 15 TLG - 71175 Manual

Product: