Manual Gude Pro PWS 700 BR 75785 (page 41 of 112) (English, German, Dutch, French, Italian)

629055

Zoom out

Zoom in

1/112

PWS 700 BR ENGLISH

applicable for operation and other generally recog-

nised occupational therapy and safety technique

regulations. Any other use is considered a use in

con ict with the designation. The manufacturer will

not be held liable for any consequential damage of

any type: the risk will be borne by the user.

Optional changes to the saw exclude the liability

of the manufacturer for consequential damage of

any type.

The saw may only be made ready, used and

maintained by persons familiarised with such acts

and instructed in possible risks. Repairs may only be

executed by us or by customer services speci ed by

us. The machine must not be used in an explosion-

risk environment and must not be exposed to rain.

Metal parts (nails, etc.) must necessarily be removed

from the material cut.

Safe removal of possible blocking

Switch the engine o and wait until the circular saw

blade stops.

Check it and localise the blocking.

Remove the blocking while considering all safety

instructions.

Check the machine visually and make sure it is not

damaged. In particular, the saw blade must not show

any sign of damage.

Contact the Technical Assistance (see Servicing) if

there is any doubt regarding the blocking removal or

full operability.

Maintenance

Switch the engine o and remove the socket plug

before any work on the engine. Wait until all rotating

parts have stopped and the appliance has cooled

down.

Check all screw and plug-in connections and pro-•

tective equipment if  rm and tightened properly

and whether all moving parts are running smooth

whenever the appliance is to be put into operation.

Prior to every use, visually check the machine to •

rule out any defects.

Keep the appliance, especially the tank and engine,

clean at all times

The sawdust ejection and/or dust exhauster should

be cleaned at regular intervals. Never spray water on

the machine!

All moving parts should be treated with environmen-

tal-friendly oil. Never use any grease!

Check the wear of the saw blade. Blunt saw blades

must be sharpened. Clean saw blades covered with

resin.

The ball bearings of the saw shaft are protected

against dust and are therefore service-free, i.e. the

bearings need not be lubricated.

Repairs and works speci ed in these Instructions may

only be performed by quali ed authorised sta .

Use only original accessories and original spare parts.

Only a r

egularly maintained and treated appliance

can serve as a satisfactory aid. Insu cient mainte-

nance and care can lead to unforeseen accidents and

injuries.

Deactivation and disposal

If the machine can no longer be used and it is to be

disposed, it must be deactivated and disassembled, i.e.

it must be put to a state in which it may not be used for

purposes for which it has been designed. The process

of disposal must consider the recovery of basic materi-

als of the machine. These materials can be potentially

reused in the recycling process. The manufacturer re-

jects any liability for any personal or property damage

incurred as a result of reuse of parts of the machine if

such parts are used for purpose other than the original

respective purpose. Machine deactivation: Each pro-

cess of deactivation or disposal must be performed by

sta trained for this purpose.

The machine is disintegrated into parts.•

Block each moving part of the machine.•

Each machine element should be delivered to •

certi ed collection centres.

Rubber parts should be removed from the machine •

and delivered to a rubber parts collection centre.

There is no other residual risk after deactivation and •

blocking of the moving parts.

Electrical structural elements are a special waste and •

need to be disposed separately from the machine.

Approved extinguishers (e.g. powder extinguisher)

need to be used in case of  re of the electrical

equipment of the machine.

Guarantee

A warranty period of 12 months applies to com-

mercial use and 24 months apply to private use and

commences on the day of purchase of the device.

Warranty applies exclusively to failures due to defec-

tive material or workmanship. An original sale slip

with indication of date of sale must be presented in

case of claiming for the warranty rights.

Warranty does not cover unprofessional use such

as device overload, violent use, damage caused by

third party or foreign materials, failure to comply with

operations and assembly manual, and normal wear

and tear.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude Pro PWS 700 BR 75785 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 8,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude Pro PWS 700 BR 75785 Manual

Product: