Manual Gude Pro PWS 650 BR 75782 (page 40 of 112) (English, German, Dutch, French, Italian)

629056

Zoom out

Zoom in

1/112

PWS 650 BR | PWS 700 BR ENGLISH

Do not use saw blades not corresponding to the key

data given in these instructions for use.

It is essential to adhere to the maximum speed speci-

 ed on the saw blade.

Only use tools that meet standard EN 847-1.

Transport and store the tools in a suitable container.

To minimise noise, the tool must be sharpened and

all noise reducing elements (covers etc.) must be

properly adjusted.

Replace the table insert when worn.

Familiarise with the safety procedures for cleaning,

maintenance and regular removal of sawdust and

dust to reduce the risk of  re.

Make sure the  ange used is suitable for the given

purpose of use, as speci ed by the manufacturer.

Use only original accessories and original spare parts.

Switch the machine immediately o when blocked.

Switch o the engine and remove the cut material

that has got stuck.

Handling equipment to be used only when handling

the machine.

The machine has been designed for DIY to cross

cut  re wood.

Cutting logs with diameter of more than

220/240mm (depending on the model) is not allo-

wed as such workpieces would not be safe to hold.

The minimum diameter is 80 mm (pieces of wood

with a smaller diameter cannot be caught to barbs

and may slip o the cradle).

Workpiece diameter:

Minimum 80 mm

Maximum 220/240 mm

The maximum length of the material cut is 1000 mm

and the minimum length of the material cut is 500

mm.

As there is no exhauster, the circular saw for  re

wood may only be used outdoors.

Only such workpieces that can be safely laid and

held in the cradle may be processed.

Using HSS saw blades is not allowed as such steel is

hard and fragile.

Risk of injury as a result of saw blade breaking and

saw blade pieces being thrown away.

The use in accordance with the designation also

includes the satisfaction of manufacturer-speci ed

conditions for operation, maintenance and repairs

and following safety instructions included in the

manual.

It is necessary to follow the safety regulations

applicable for operation and other generally recog-

nised occupational therapy and safety technique

regulations. Any other use is considered a use in

con ict with the designation. The manufacturer will

not be held liable for any consequential damage of

Never store the appliance with petrol in the tank

inside a building where petrol fumes may potentially

get in touch with open  re or sparks.

When the appliance is not going to be used for a long

time, store it with an empty tank.

Do not change the controlled engine setting and do

not rev the engine up.

Safety instructions for circular saws

for  rewood

Wear ear protectors. Exposure to noise can cause

hearing loss.

Wear gloves when handling saw blades and rough

materials.

When being operated, the machine must stand on a

horizontal and  at surface and the  oor around the

machine must be  at, well-maintained and with no

waste, such as sawdust and cuttings.

The processed bundle of workpieces and  nished

workpieces should be placed near the standard place

of work of the operator.

Check all screw and plug-in connections and

protective equipment if  rm and tightened properly

and whether all moving parts are running smooth

whenever the appliance is to be put into operation.

The protective equipment on the appliance is

strictly prohibited to be disassembled, changed,

used in con ict with the designation and it is

prohibited to attach any protective equipment of

other manufacturers.

The machine must not be used under any

circumstances if the machine or the safety devices

are damaged.

Any faults with the machine, including any related to

the safeguard or the saw blades, must be reported to

the persons in charge of safety as soon as the faults

are discovered.

Make sure the circular saw blade is  tted properly

before starting the engine.

The saw must not be used any longer if the cradle fails

to automatically return to the rest position.

The saw must not be used any longer if the saw

blade fails to stop in 10 seconds after switching the

machine o .

For security, use devices such as safety- and pressure

device, guide slide, rip fence, etc.

Removing sawdust and chippings from the machine

when running is strictly prohibited.

It is necessary to refrain from removing any cuttings

and parts of workpieces from the cutting area.

Do not use saw blades which are damaged or

deformed.

Properly sharpened saw blades to be used only.

Follow instructions for use, adjustment and repair of

saw blades of manufacturers.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude Pro PWS 650 BR 75782 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 20,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude Pro PWS 650 BR 75782 Manual

Product: