629053

Gude Pro PBK 500 75771 Manual

28
Zoom out
Zoom in
Previous page
1/88
Next page
24
GB
It is necessary to select a saw blade which is suitable for
the material being cut.
Do not use saw blades not corresponding to the key data
given in these instructions for use.
Properly sharpened saw blades to be used only.
It is essential to adhere to the maximum speed specied
on the saw blade.
Do not use saw blades made of high-speed steel. Only use
tools that meet standard EN 847-1.
Transport and store the tools in a suitable container;
To minimise noise, the tool must be sharpened and all
noise reducing elements (covers etc.) must be properly
adjusted.
Familiarise with the safety procedures for cleaning,
maintenance and regular removal of sawdust and dust to
reduce the risk of re.
Make sure the ange used is suitable for the given purpo
-
se of use, as specied by the manufacturer.
Switch the machine immedia
tely o when blocked.
Unplug the machine and remove the stuck piece of wood.
Handling equipment to be used only when handling the
machine.
Maintenance
Before carrying out any work on the machine,
disconnect the plug from the socket.
WARNING The machine must not be used under any
circumstances if the machine or the safety devices are
damaged.
Repairs and works specied in these Instructions may
only be performed by qualied authorised sta.
At all times, keep the machine, ventilation slots, in
particular, clean. The sawdust ejection and/or dust ex-
hauster should be cleaned at regular intervals. Never
spray w
ater on the machine!
Replace the table insert when worn
The ball bearings of the saw shaft are protected
against dust and are therefore service-free, i.e. the
bearings need not be lubricated.
Use only original accessories and original spare parts.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insucient mainte
-
nance and care can lead to unforeseen accidents and
injuries.
Nev
er clean the machine and its components with
solvents, ammable or toxic liquids. Us only a damp
cloth making.
Apply environment-friendly oil to all moving parts.
If necessary, a list of spare parts can be found at www.
guede.com.
The processed bundle of workpieces and nished work
-
pieces should be placed near the standard place of work
of the operat
or.
Switch the machine o and unplug it when unattended.
Check all screw and plug-in connections and
protective equipment if rm and tightened
properly and whether all moving parts are
running smooth whenever the appliance is to be
put into operation.
The protective equipment on the appliance is
strictly prohibited to be disassembled, changed,
used in conict with the designation and it is
prohibited to attach any protective equipment of
other manufacturers.
The appliance must not be used if damaged
or safety equipment is defective. Replace any
worn-out and damaged parts.
Any faults with the machine, including any related to
the safeguard or the saw blades, must be reported to
the persons in charge of safety as soon as the faults are
discovered.
Before use check machine, cable, and plug for any dama
-
ges or material fatigue. Repairs should only be carried out
by authorised S
ervice Agents. Check the emergency
switch-o whenever you are to use the appliance.
Before pressing On/O, make sure the saw blade has
been tted properly.
The saw must not be used any longer if the saw blade fails
to stop in 10 seconds after switching the machine o.
For security, use devices such as safety- and pressure
device, guide slide, rip fence, etc.
During round timber cutting it is necessary to x the
workpiece against rotation by means of xing tool and
use circular saw type suitable for cross cuts.
Do not use circular saws for cutting slots (grooves in
workpiece).
No grooves or cuts allowed.
Support large panels to minimise the risk of blade pin
-
ching and kickback. Large panels tend to sag under their
own weigh
t. Supports must be placed under the panel
on both sides, near the line of cut and near the edge of
the panel.
Removing sawdust and chippings from the machine
when running is strictly prohibited.
It is necessary to refrain from removing any cuttings and
parts of workpieces from the cutting area.
Do not use blunt, damaged or distorted circular saw
blades.
The teeth thickness, or the set of the teeth must be thicker
than the body of the blade and the riving knife. Do not
remove the riving knife.
ENGLISH
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude Pro PBK 500 75771 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude Pro PBK 500 75771 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info