Manual Gude Pro PBK 500 75771 (page 25 of 88) (English, German, Dutch, French, Italian)

629053

Zoom out

Zoom in

1/88

ENGLISH

Read and understand the opera-

ting instructions before using the

appliance. Abide by all the safety

measures stated in the service manual. Act responsib-

ly toward third parties.

In case of any doubts about connection and operati-

on refer please to our customer center

Specied Conditions Of Use

The circular saw is only intended to cut wood and wood

like products. Respecting technical data and safety

precautions.

Do not use this product in any other way as stated

for normal use. Not observing general regulations

in force and instructions from this manual does not

make the manufacturer liable for damages.

Residual risks

Danger of injury !

Always keep hands away from the path of the saw blade.

In spite of compliance with all relevant design

regulations, dangers may still present themselves

when the machine is operated, e.g.:

- work piece parts being thrown o,

- parts of damaged tools being thrown o,

- noise emissions,

- wood dust emissions.

Emergency procedure

Conduct a rst-aid procedure adequate to the injury

and summon qualied medical attendance as quickly

as possible. Protect the injured person from further

harm and calm them down. For the sake of eventual

accident, inaccordance with DIN13164, a workplace

has to be ttedwith a rst-aid kit. It isessential to

replace any usedmaterial in the rst-aid kitimmedia-

tely after it has been used.

If you seek help,state the following pieces ofinfor-

mation:

1. Accident site

2. Accident type

3. Number of injured persons

4. Injury type(s)

Requirements for operating sta

The operating sta must carefully read the Opera-

tingInstructions before using the appliance.

Qualication: Apart from the detailed instructions by

aprofessional, no special qualication is necessary

forappliance using.

Minimum age: Persons over 18 years of age can

only workon the appliance.An exception includes

youngsters trained in order to reachknowledge

under supervision of the trainer duringoccupational

education.

Technical Data

Site circular saw

Art. No ................................................................................75771

Service connection ..................................400 V~50 Hz

Rated input............................................3000W S6/40%

Idle speed .......................................................2800 min

-1

Saw blade dia. x hole dia ............................500 x 30 mm

Riving knife ............................................................. 3 mm

Riving knife guide slot ...................................10,5 mm

Cutting depth max. ..........................................175 mm

Table Extension ......................................720 x 400 mm

Weight ......................................................................110 kg

Noise and Vibration Information

Sound pressure level L

1), 2)

................................87,6 dB (A)

Guaranteed sound power level L

...............108 dB (A)

Wear ear protectors!

Measured according to EN ISO 11202:1995/AC:1997,

unter Last, Uncertainty K=4 dB (A)

The values stated are emission values and as such do not necessarily constitute values which are safe for the

workplace. Al- though there is a correlation between emission levels and environmental impact levels, whether

further precautions are neces- sary cannot be derived from this. Factors inuencing the actually present envi-

ronmental impact level in the workplace include the characteristics of the work area and other noise sources, i.e.

the number of machines and other neighbouring work process- es. The permitted workplace values can likewise

vary from country to country. This information is intended to assist the user in estimating hazards and risks.

Theappliance meets EN 61000-3-11 requirements and is subject to specialconnection conditions. That means

that use on optionally selectedconnection points is inadmissible. Theappliance can lead to occasional voltage

uctuations underunfavourable power conditions. Theappliance is only designated to be used for connection

points notexceeding the maximum allowed impedance of Zmax=0,233 Ω. Asa user, you must make sure your

connection point on which you wantto use the appliance meets the above-mentioned requirements –after

agreement with your electricity supplier ifnecessary.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude Pro PBK 500 75771 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude Pro PBK 500 75771 Manual

Product: