Manual Gude Pro GTKS 1800 PrO 75205 (page 28 of 88) (English, German, Dutch, French, Italian)

629064

Zoom out

Zoom in

1/88

GTKS 1800 ProENGLISH

Read and understand the opera-

ting instructions before using the

appliance. Abide by all the safety

measures stated in the service manual. Act responsib-

ly toward third parties.

In case of any doubts about connection and operati-

on refer please to our customer center

Specied Conditions Of Use

The circular saw is only intended to cut wood and

wood like products.

Do not use this product in any other way as stated

for normal use. Not observing general regulations

in force and instructions from this manual does not

make the manufacturer liable for damages.

Stock having a round or irregular cross

section (such as rewood) must not be cut, as it

can not be securely held during cutting.

Requirements for operating sta

The operating sta must carefully read the Opera-

tingInstructions before using the appliance.

Because wrong using of the appliance can be risky,

only competent persons are allowed to operated it.

Operator must be trained properly concerning adjust-

ment, operation and appliance using.

Qualication: Apart from the detailed instructions

by aprofessional, no special qualication is necessary

forappliance using.

Minimum age: Persons over 18 years of age can

only workon the appliance.An exception includes

youngsters trained in order to reachknowledge

under supervision of the trainer duringoccupational

education.

Training: Using the appliance only requires corre-

spondingtraining by a professional or the Operating

Instructions. Nospecial training is necessary.

The operator is responsible for accidents or risks to

third parties.

Technical Data

Circular table saw GTKS 1800 Pro

Art. No ................................................................................75205

Service connection ..................................230 V/ 50 Hz

Rated input...........................................................1800 W

Idle speed ...................................................... 4500 min

-1

Saw blade dia. x hole dia ..................... 255 x 30 mm

Riving knife ..........................................................2,5 mm

Riving knife guide slot ........................................ 9 mm

Cutting depth max. 90° .....................................82 mm

Cutting depth max. 45° .....................................58 mm

worktable .................................................640 x 580 mm

saw table............................................................640 x 145 mm

Weight .............................................................................32 kg

Noise and Vibration Information

Sound pressure level L

......................................87 dB (A)

Sound power level L

........................................100 dB (A)

Wear ear protectors!

Vibration emission value a

...............................<2,5 m/s

Measured according to EN 61029,

Uncertainty K=3 dB (A)

Measured according to EN 61029,

Warning: The vibration emission level will vary because of the ways in which a power tool can be used and may

increase above the level given in this information sheet.

The vibration emission level may be used to compare one tool with another.

It may be used for a preliminary assessment of exposure.

An accurate estimate of the vibratory load shouldalso take into account the times when the tool isshut down

or when it is running but not actually inuse. This may signicantly reduce the vibratoryload over the total

working period.

Identify additional safety measures to protect theoperator from the eects of vibration such as:maintain the

tool and the accessories, keep thehands warm, organisation of work patterns.

Theappliance meets EN 61000-3-11 requirements and is subject to specialconnection conditions. That means that

use on optionally selectedconnection points is inadmissible. Theappliance can lead to occasional voltage uctuations

underunfavourable power conditions. Theappliance is only designated to be used for connection points notexcee-

ding the maximum allowed impedance of Zmax=0,233 . Asa user, you must make sure your connection point on

which you wantto use the appliance meets the above-mentioned requirements –after agreement with your electricity

supplier ifnecessary.

Tischkreissäge GTKS 1800 Pro 2.1.indd 22 22.07.11 13:46

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude Pro GTKS 1800 PrO 75205 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude Pro GTKS 1800 PrO 75205 Manual

Product: