Manual Gude Pro 8 TLG PRO 75180 (page 7 of 23) (English, German, Dutch, French, Italian)

629045

Zoom out

Zoom in

1/23

Supply includes

Picture 1:

1. Case

2. Oil bottle

3. Handle

4. Compressed air connector

5. 5 individual cutters

Appliance

8-piece PRO set of pneumatic demolition hammer

Professional pneumatic demolition hammer with a flap lock for quick

cutter exchange with 5 individual cutters. The demolition

hammer can without any problem be used for banging of facings and

exterior plaster, knocking off screws, punching of metal plates,

creating grooves in walls and breaking through walls.

Rubber handle and foul air channel.

EU Declaration of Conformity

We, Güde GmbH & Co. KG Birkichstraße 6, 74549 Wolpertshausen,

Germany, hereby declare the conception and construction of the be-

low-mentioned appliances correspond - at the type of construction

being launched - to appropriate basic safety and hygienic require-

ments of EC Directives.

In case of any change to the appliance not discussed with

us the Declaration expires.

Marking of appliances:

8-piece PRO set of pneumatic demoli-

tion hammer

Order No. 75180

Date/producer signature: Oct 28, 08

Signed by: Mr Arnold, Managing Director

Appropriate EU Directives:

2006/42/EG

Harmonised standards used:

EN 792-4+A1:2008

Technical data

Service pressure: 6.3 bar

Air consumption: 240 l/min

Air connector-thread: ¼”

6-square cutter fixture 10 mm

Strokes per minute: 3,000

Stroke length: 67 mm

Weight: 1.7 kg

Recomm. hose cross section: 10 mm

noise level: 103 dB

Vibration acceleration: 13.8 m/s²

General safety instructions

The Operating Instructions need to be completely

read before first use of the appliance. Should any

doubts concerning the appliance connection and han-

dling arise, please contact the producer (service de-

partment).

Handling

Never aim with the tool end that strikes at yourself or

any other person. The appliance is connected with the

compressed air supply hose. Use the pneumatic ap-

pliance with allowed service pressure only.

Safety provisions

Protect yourself and your surroundings against acci-

dents using suitable safety measures.

• Do not touch striking parts.

• Do not use the demolition hammer to any other

purposes than to which it has been designed.

• Secure the pneumatic tools before children.

• Work only when not tired and able to concen-

trate.

• Compressed air connector via quick-acting

coupling only.

• Working pressure needs to be adjusted by a

reducer.

• Do not use oxygen or inflammable gases as a

source of energy.

• Disconnect the appliance from the compressed

air source before removing any failure.

• Use original spare parts only.

• Never let the appliance run with no load at full

free-running revolutions.

• Wear necessary protective clothes, especially

ear protectors when working with the demolition

hammer.

• Use the appliance with service pressure only.

• Do not needlessly use long pneumatic hoses to

avoid tripping.

• Sparks can be generated when cutting. Beware

of combustible materials in the surrounding ar-

ea.

Maintenance and treatment

Trained persons are allowed to execute the

maintenance works only.

Following the mentioned instructions for mainte-

nance is a guarantee for a long service life and

trouble-free operation of this high-quality product.

Disconnect the appliance from the compressed air

source at maintenance and treatment. For perma-

nent faultless operation of your appliance it is nec-

essary to ensure everyday cleaning and regular lu-

bricating. Use special pneumatic oil only.

You can choose from the following options:

a) Via mist lubricator

The complete maintenance unit contains a mist

lubricator and is attached to the compressor.

b) Via lubricator on the piping

In the immediate vicinity of the appliance (in a

distance of app. 50 cm) a lubricator is installed

on the piping that supplies sufficient volume of

oil to the appliance.

c) Manually

If your equipment has no maintenance unit or

lubricator on the piping you need to add 3 – 5 oil

drops to the compressed air connector before

each putting the pneumatic appliance into op-

eration. If the pneumatic appliance is not used

for several days you must add 5 – 10 oil drops to

the compressed air connector before starting the

appliance. Store the pneumatic tools/appliance

in dry rooms only.

The air hose must be removed and more pneumatic

oil poured in the air intake every three months or

when the demolition hammer is used less often. Re-

connect the air hose and let the demolition hammer

run for app. 30 seconds so that the compressor en-

gine was cleaned. After cleaning, follow the lubrica-

tion instructions.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude Pro 8 TLG PRO 75180 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude Pro 8 TLG PRO 75180 Manual

Product: