629041
14
Zoom out
Zoom in
Previous page
1/18
Next page
Scope of Supply
Figure 1:
1. Left/Right
2. Handle
3. Pneumatic connection
4. Clutch
Unit
PNEUMATIC DRILL 2600 PRO
Professional pneumatic drill 3/8 with a fast left-right.
Switch. Pistol handle with a rubber coat to ease the vie
vibrations.
GB
Declaration of EU conformity
We, Güde GmbH & Co. KG Birkichstraße 6,
74549 Wolpertshausen, Germany
Hereby declare that the concept and structure of the types if
instruments shown below are corresponding to the basic requirements
of the EU directives of safety and health.
If the instrument is changed and the change was not
consulted with us, this declaration will loose its validity.
Marking of instruments 2600 PRO Ord.No.: 75150
Date/signature of the maker: 14.10.08
The signatory’s data: Arnold, executive officer
Respective EU directives:
89 / 392 / EWG; 91 / 368 / EWG; 93 / 44 / EG
Harmonised standards used:
EN 792; DIN 45635
Technical Data
2600 PRO
Operating pressure 6,3 bar
Air consumption 113 – 240 l/min
Drill mm 1-10
Air connection screw ¼”
Max. idling speed 2600 min
-1
Recommended hose Cross-section 10 mm
Noise data Lwa 98 dB
Weight 1,1 kg
Ordering no. 75150
General Safety Regulations
Operating manual should be completely read
before the first use. If doubts regarding the unit
operation arise, ask the producer (servicing
department) for advice.
Operation
Do not direct the rotating end of the tool against
yourself or against other persons. Connect the
tool with the air supply hose
Use pneumatic tools under allowed operating
pressure only.
Maintenance and Care
Only trained persons ate allowed to do the
maintenance.
Observing warning commands shown in the
Lasting and trouble-free function of your ratchet
screwdriver is grounded on regular lubrication.
Use only a special tool oil. Pick up a possibility of
lubrication: Use only a special tool oil. Pick up a
possibility of lubrication.
Ways of lubrication are following:
a) Via a beam added lubricator
The full maintenance unit include a beam
added lubricator and is placed on the
compressor.
b) Via a lubricator on the piping
A lubricator installed on piping supplying the
unit with sufficient amount of oil in an
immediate distance from the unit
(approximately 50 cm).
c) Manually
If there is no maintenance unit or a lubricator
on piping, 5-6 drops of oil should be put in
pneumatic connection before every putting in
operation.
Store the pneumatic tool in dry rooms.
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude Pro 2600 PRO 75150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude Pro 2600 PRO 75150 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info