629043

Gude Pro 22000 PRO 75160 Manual

8
Zoom out
Zoom in
Previous page
1/34
Next page
Supply includes (picture 1)
1. Compressed air connector
2. Control lever
3. Handle
4. Tool hold
Appliance
22000 PRO PNEUMATIC ROD GRINDING MACHINE
Professional pneumatic rod grinding machine with a double-
embedded shaft, rubbered handle for effortless work with
minimum vibrations. Due to the foul air channel, there is no
dust swirl on the work-piece! Safety switch against
unintentional switching on.
Technical data
Service pressure: 6.3 bar
Air consumption: 113 - 540 l/min
Max. free-running revs: 22000 U/min
Recomm. hose cross sect.: 10 mm
Lwa noise data: 97 dB
Air connection: ¼ “
Vibration acceleration: 2,5 m/sec²
Weight: 0,6 kg
General safety instructions
Please read carefully these Operating Instructions.
Familiarise with the control elements and appropriate
appliance using. Keep the Operating Instructions for future
reference.
Safe working
Keep the place of your work clean!
Mess in the place of your work may result in injuries.
Consider the environment influences
Do not expose the appliance to rain.
Do not use the appliance in a wet or moist environment.
Provide appropriate lighting.
Do not use the appliance near flammable liquids or gases.
Keep other persons in safe distance!
Do not let other persons, especially children, touch the
appliance and the cable. Keep them in a sufficient distance
from the place of your work.
Store the appliance properly!
An appliance that is not used should be stored in a dry,
locked place out of reach of children.
Do not overload the appliance!
Work in the specified output limits.
Use the right appliance!
Do not use the appliance for purposes for which it has not
been designed.
Look after your appliance!
Follow the maintenance regulations and instructions.
Check regularly the appliance cable and have it replaced by
an authorised professional if damaged.
Check regularly the extension cable and replace it if
damaged. Keep the handles dry, with no oil and grease.
Be careful!
Pay attention to what you are doing. Use common sense
when working. Do not use the appliance when you are tired.
WARNING!
Use of any other accessories may pose a risk of injury.
Your appliance should be repaired by an electrician only!
This appliance meets the appropriate safety provisions.
Repairs may only be executed by an electrician and original
spare parts must be used, otherwise the user may face a risk
of injury.
Appliance-specific safety instructions
Safety notice! Failing to follow these instructions
can cause an injury to you or other persons.
1. Read the following Operating Instructions for using the
pneumatic appliance and follow the safety instructions
for using the pneumatic appliance.
2. ALWAYS wear approved protective glasses, earphones,
a respirator and safety gloves!
3. Disconnect the appliance from air supply if not used.
NEVER replace any parts of the accessories or
SERVICE them if the appliance is connected with the air
supply.
4. Ensure that your hands could freely move while working
on the appliance to be able to execute the work safely.
5. Use the appliance only at a speed for which it has been
designed.
6. Properly maintain the appliance and follow all
instructions for appliance lubrication and maintenance.
7. Do not damage the hoses and connecting pieces by
carrying the appliance with its hose or by disconnecting
the hose from the air supply by pulling. Prevent the hose
from coming into contact with high temperatures, oil and
sharp edges. The hose should be replaced if damaged
or worn out.
8. Use the appliance with allowable service pressure only.
Higher pressure would shorten the service life of your
appliance as a result of higher load.
9. There can be sparks during the grinding process.
10. Do not use any damaged grinding material.
11. Do not needlessly use long pneumatic hoses to avoid
tripping.
12. Never leave the pneumatic appliance unattended.
13. Never put the appliance near people or animals.
14. Never aim at people or animals with the air current.
15. Never put the pneumatic appliance near body holes – it
can lead to injuries dangerous to life!
16. Injury by stone.
17. Attention! Parts breaking off!
Beware of the rotary tool!
Operation
Wear protective glasses! Wear earphones! Wear
safety gloves!
Before everyday use, please empty the water from the
compressor tank and blow the condensation from the air
hose.
If seal has not yet been applied on the pneumatic insertion
wrap it with a Teflon tape (picture2 and 3)
• Start the compressor.
• Fix the required grinding shank to the pneumatic
grinder.
• Connect the pneumatic grinder with the pneumatic
hose. Caution! Do not exceed the maximum operating
pressure!
• Start working by pressing the Start button.
8
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude Pro 22000 PRO 75160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude Pro 22000 PRO 75160 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info