629038

Gude Pro 1.5 PRO 75140 Manual

5
Zoom out
Zoom in
Previous page
1/19
Next page
GB
Please read carefully these Operating Instructions before putting the appliance into operation
A.V. 2 Any reprints, even in abbreviated version, are subject to approval. Technical changes reserved.
GB
Do you have any questions? Any claim? Do you need spare parts or operating instructions?
We will quickly help you and without bureaucracy at our homepage www.guede.com
in the Servicing part. Please help us be able to help you.
In order to identify your device in case of claim we need the serial No., assortment item No. and year of production. All this data can be found on
the type label. Please enter it here for future reference.
Serial No._____________________________Product No.___________________________Year of production:_______________________
Tel.: +49 (0) 79 04 / 700-360 Fax: +49 (0) 79 04 / 700-51999 E-Mail: support@ts.guede.com
Symbols: product safety, commands:
Product complying with respective EU standards Use protection goggles and ear protectors Read the operation manual before use
Ratchet screwdriver 1/2" PRO
Hardy, chromium plated, polished finish. Extremely high torque (110 Nm),
owing to which additional tightening is not necessary. Softgripp heated
handgrip. Tool bracket of high quality. Low vibrations, long-life gearing
right/left from the gear on the head. Air outlet on pneumatic coupling to provide
for nice work. Continuous adjustment of speed.
It includes a connecting plug of a usual nominal width 7,2.
Unit Scope of Supply (Fig. 1)
1. Handle
2. Pneumatic coupling
3. Control lever
4. Tool hold
GB
EC Declaration of Conformity
We, Güde GmbH & Co. KG Birkichstraße 6, 74549 Wolpertshausen, Germany,
hereby confirm the following appliances correspond – on a basis of their
conception and their construction type and in designs launched by us – to
appropriate basic requirements of directives of the European Community
concerning occupational health and safety.
In case of any change to appliances not approved by us the Declaration
expires.
Marking of appliances: Ratchet screwdriver 1/2" PRO
Order No.: 75140
Date/producer signature: 03.01.2012
Signed by: Mr Arnold, Managing Director
Respective EU standards:
2006/42/EC
Harmonised standards used:
EN 792-6+A1:2008
Guarantee
Guarantee claims according to the guarantee certificate attached. Please,
understand that we are unable to accept the guarantee for the following
reasons:
• Breach of operation and service instructions .
Necessary cleaning neglect.
• Forcible use, unprofessional handing, misuse or accident.
• Laic interventions or unprofessional attempts to do a repair.
General Safety Directions
Read the operation manual carefully .
Get familiar with the adjustment and correct use of the unit
Assigned Use
The adjustment screwdriver is a pneumatic tool to do craft works
easily. It works very well on motor vehicles, motorcycles,
agricultural machines or assembly belts, primarily on hardly
accessible places. To obtain a maximum torque, additional
fastening by hand with ratchet screwdriver is not permitted.
Waste air comes out in the forward part of the body. Pneumatic
coupling is formed by fast-acting clutch.
Safety Provisions
Protect yourself and those around against accidents with suitable safety
means.
• Do not touch the rotating parts.
• The ratchet screwdriver should not be used in contrary to
determination.
• Protect the pneumatic tools from children.
• Get down to work well-rested and concentrated.
• Pneumatic connection via a fast-acting clutch only.
• Set-up the work pressure on reduction valve.
• Do not use oxygen or inflammable gases as the source of energy.
• Before removing failures, disconnect the unit from the source of
pressure air.
• Use only the genuine spare parts.
• Never let the unit idle at full.
• When working with a ratchet screwdriver, always wear required
protection suits and ear protectors.
Technical Data
Operating pressure: 6,3 bar
Air consumption: 180-540 l/min
Air connection crew thread: 1/4"
Max. torque: 110 Nm
Speed 160 min
-1
Recommended hose Cross-section : 10 mm
Weight: 1,4 kg
Initial Operation
Screw the plug-in clutch included in the delivery (pos. 2) screw in the
reduction clutch. Use a box-end or a forked wrench for it.
Notice: Tighten the thread with a Teflon tape.
Pull a required socket wrench insert on the drive (pos.4). Connect the air
hose and a fast-acting clutch to the plug-in clutch. Put the socket wrench
insert on the screw or the nut being released/tightened. Set-up the required
direction of turning on the switching lever (Fig.2) and pull the draw-off lever
(pos. 3).
The required speed and torque may be set up with a screw on the hand grip
(Fig. 3).
Maintenance and Care
Observing warning commands shown in the manual will provide this high
quality product long service life and fault-free operation. Lasting and trouble-
free function of your ratchet screwdriver is grounded on regular lubrication.
Use only a special tool oil. Pick up a possibility of lubrication. :
b) Via a beam added lubricator
The full maintenance unit include a beam added lubricator and is placed on
the compressor.
c) Via a lubricator on the piping
A lubricator installed on piping supplying the unit with sufficient amount of oil
in an immediate distance from the unit (approximately 50 cm).
c) manually
If there is no maintenance unit or a lubricator on piping , 5-6 drops of oil
should be put in pneumatic connection before every putting in operation.
Store the pneumatic tool in dry rooms only.
5
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude Pro 1.5 PRO 75140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude Pro 1.5 PRO 75140 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info