628467
18
Zoom out
Zoom in
Previous page
1/94
Next page
18
13.3 Water Drainage
Fig. 25
x Use the bleed screw to drain the pump.
13.4 Air Receiver Pressure
Fig. 26
x Factory-adjusted switching pressure should be 3 – 4 bar after
completed filling process.
x Preliminary pressure in the receiver (air) is 1,5 ± 0,3 bar and
shall be checked and adjusted on a regular basis.
13.5 Operating Safety Instructions
x Do not use the pump until you have read the manual.
x Observe any safety instructions contained in the manual.
x Be responsible to the others.
13.6 Step-by-Step Instructions
x Connect the respective suction line with a back valve to the output connection. In addition, pack all the threaded connections with
Teflon tape.
x Filling: Remove the bleed screw on the rear side of the pump and on the pressure line connection. Fill the unit with water until
water is running from the de-aeration hole.
x Pack the bleed screw and screw it in again. Tighten the pressure line and connect it.
x Plug the pump in.
Caution: Work carefully when connecting the suction and pressure line to the plastic body of the pump so that material does
not split.
13.7 Accessories
Float Switch S 10/2 (to be obtained as an accessory)
To be added on household water plants to prevent dry run.
Use for household water plants:
To be fitted on the pump suction hose .
Connection/Wiring and function agree with the use of
Submersible pumps.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude MP 120-5A 24 LT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude MP 120-5A 24 LT in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info