623621

Gude GWS 600 EC I 01845 Manual

29
Zoom out
Zoom in
Previous page
1/108
Next page
GB
25
GWS 600 EC I • GWS 700 EC I • GWS 600 EC I HM • GWS 700 EC I HM ENGLISH
of work of the operator.
Switch the machine o and unplug it when unatten-
ded.
Check all screw and plug-in connections and
protective equipment if  rm and tightened properly
and whether all moving parts are running smooth
whenever the appliance is to be put into operation.
The protective equipment on the appliance is
strictly prohibited to be disassembled, changed,
used in con ict with the designation and it is
prohibited to attach any protective equipment of
other manufacturers.
The machine must not be used under any
circumstances if the machine or the safety devices
are damaged.
Before use check machine, cable, and plug for any
damages or material fatigue. Repairs should only be
carried out by authorised Service Agents.
Any faults with the machine, including any related to
the safeguard or the saw blades, must be reported to
the persons in charge of safety as soon as the faults
are discovered.
Before pressing On/O , make sure the saw blade has
been  tted properly.
The saw must not be used any longer if the cradle fails
to automatically return to the rest position.
The saw must not be used any longer if the saw
blade fails to stop in 10 seconds after switching the
machine o .
For security, use devices such as safety- and pressure
device, guide slide, rip fence, etc.
Removing sawdust and chippings from the machine
when running is strictly prohibited.
It is necessary to refrain from removing any cuttings
and parts of workpieces from the cutting area.
Do not use saw blades which are damaged or
deformed.
Properly sharpened saw blades to be used only.
Follow instructions for use, adjustment and repair of
saw blades of manufacturers.
Do not use saw blades not corresponding to the key
data given in these instructions for use.
It is essential to adhere to the maximum speed speci-
ed on the saw blade.
Only use tools that meet standard EN 847-1.
Transport and store the tools in a suitable container.
To minimise noise, the tool must be sharpened and
all noise reducing elements (covers etc.) must be
properly adjusted.
Replace the table insert when worn.
Familiarise with the safety procedures for cleaning,
maintenance and regular removal of sawdust and
dust to reduce the risk of  re.
Make sure the  ange used is suitable for the given
purpose of use, as speci ed by the manufacturer.
4) Use and treatment of electric tools
a) Do not overload the machine. Use appropriate
electric tools for your work. Working with appro-
priate electric tools is better and safer when within
the speci ed power range.
b) Do not use electric tools with a defective switch.
An electric tool that cannot be switched on or o is
dangerous and must be repaired.
c) Unplug the machine and/or remove the battery
before any machine adjustment, replacement of
accessory equipment and storing the machine.
This safety measure prevents unintentional star-
ting of the electric tool.
d) Keep any electric tool that is not being used out
of reach of children. The machine must not be
used by persons not familiarised with its use and
not having read these Instructions. Electric tools
are dangerous if used by inexperienced persons.
e) Treat electric tools carefully. Check whether the
moving parts work perfectly and do not drag,
whether not broken or damaged to such an
extent that functioning of electric tools could
be a ected. Have any damaged parts repaired
before using the machine. Poor maintenance of
electric tools is a cause of many injuries.
f) Keep the cutting tools sharp and clean. Carefully
treated cutting tools with sharp edges get stuck
less often and are easier to guide.
g) Electric tools, accessory equipment, extensions,
etc. to be used in accordance with these Instruc-
tions. Consider the working conditions and the
activity being performed. Using electric tools for
purposes other than those speci ed may lead to
dangerous situations.
5) Service
a) Have your electric tools repaired by quali ed
authorised sta only, using original spare parts
only. The safety of electric tools will be maintained
by this.
Safety instructions for circular saws
for  rewood
Operation is only allowed with a safety switch
against stray current (RCD max. stray current of
30mA).
The machine must be plugged to 400 Vwith 16
A fuse.
Wear ear protectors. Exposure to noise can cause
hearing loss.
Wear gloves when handling saw blades and rough
materials.
When being operated, the machine must stand on a
horizontal and  at surface and the  oor around the
machine must be  at, well-maintained and with no
waste, such as sawdust and cuttings.
The processed bundle of workpieces and  nished
workpieces should be placed near the standard place
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GWS 600 EC I 01845 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GWS 600 EC I 01845 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 12,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info