Manual Gude GV 2400 SL 95140 (page 10 of 42) (English, German, Dutch, French, Italian)

626233

Zoom out

Zoom in

1/42

- For machines on wheels: always scarify across the

hillside, never uphill or downhill. –

- Please, be especially careful when you change the

running direction on hillsides.

- Do not scarify on overly steep hillsides.

- Be especially careful when you reverse the

scarifier or when you pull it up to yourself.

- Stop the scarifier blade, if the scarifier has to be

tilted in case of transportation over a different

surface than grass and when the scarifier is

moved to and from the surface to be scarified.

- Never use the scarifier with damaged protection

devices or protective grids or without any attached

protection devices, for instance impact plates

and/or moss and grass collection devices.

- Do not change the regulation settings of the

engine or do not turn the engine over. –

- Start the engine carefully according to the

instructions of the manufacturer. Mind keeping

sufficient distance between the feet and the

scarifier.

- When you start the engine the scarifier may not be

tilted, unless the scarifier has to be lifted in the

process. In that case tilt it only as far as it is

absolutely necessary, and only on the side averted

from the user. –

- Never move your hands or feet to or under turning

parts. Always keep distance to the emission hole.-

- Never lift or carry a sarcifier while the engine is

running.-

- Put the engine down und pull the spark plug

socket: Before you release the locking bar or

remove the plugging in the emission tube. Before

you check the scarifier, clean it or work on it.-

- If a foreign object was hit, search the scarifier for

damages und and carry out the necessary repairs

before you start over and work with the scarifier

again. –

- If the scarifier starts to vibrate in an unusual way,

an immediate check-up is essential. –

- Turn off the engine if you remove yourself from the

scarifier or before you refuel. –

- The fuel tap has to be closed: position off or 0.

Application according to regulations.

What is Scarifying?

Scarifying is a deep cleansing of the lawn. The vertical

section releases the lawn from tomentum, moss and flat

growing weeds. Air, water and nutrients can come through to

the fine grass roots again.

Why should you scarify?

All these different weather periods through out the year lead

to accumulation of dead and dry weeds and moss which

cause felting of the lawn. The grass roots can not absorb any

nutrients, water or air sufficiently. The lawn wastes away.

The vertical section opens the ground, removes tomentum

and that way makes sure that the grass will be supplied

With nutrients a better way.

How do you scarify?

In case of heavily felted lawns you should scarify once

lengthwise and once across. These works should be done

twice a year. The best time is in spring, when the ground is

not frozen anymore and in late summer until the end of

September. You should not scarify any later than that, so

that the resistibility of the lawn remains for a possible strong

winter. The emitted material must be removed from the lawn

in any case. After scarifying it has to be taken care of the

ground not to dry up for 4 or 5 days, even not on the surface.

To avoid burn outs caused by intense sunrays, dryness has

to be faced seriously. The gasoline scarifier is suitable for

any private use in house and hobby garden. As scarifier for

house and hobby garden are only such to be considered as

that are not used for longer than 50 hours a year and that

are mainly used for the care of grass or lawns, but not for

public grounds, parks, sports grounds as well as not for

agriculture and forestry. Sticking to the instructions of the

manufacturer is essential for the correct use of the scarifier.

The instruction manual also contains terms of operating,

machine care and maintenance.

Caution! Because of physical danger of the user the

scarifier may not be used for the following activities: for

trimming of bushes, for cutting and breaking of cirruses, of

lawns on rooftops or in flower boxes and for breaking of tree

and hedge segments. Furthermore can the scarifier not be

used as a motor hoe for levelling bumps in the ground, like

for instance molehills. For safety reasons the scarifier may

not be used as a drive unit for other tools and tool kits of any

kind.

Remaining risks and precautions

Inappropriate local lighting.

Insufficient lighting brings out a high safety hazard.

Make sure to have sufficient lighting while working with the

device.

Disposal

Advice for disposal can be read from the pictograms on the

device and on the package. A description of each meaning

can be found in the chapter “designations”.

User Requirements

The user must read the instruction manual carefully before

usage of the device.

Qualification

Besides an extensive introduction by a competent person, no

special qualification for the usage of the device is necessary.

Minimum age

The device may only be used by persons not younger than

the age of 16. For the only exception that the usage is

carried out in the course of an apprenticeship for learning the

ability while being supervised by an instructor, a youth is

admitted to usage.

Setting up / initial operation

Remove the packaging from the scarifier and mount the

bottom pillar first and then the upper pillar with the screws

and knurled nuts provided. Now attach the moss collection

bag, which can be hooked into the body of the device when

the carriage cover is being lifted.

Appliance (Fig 1-4)

Caution: Check oil level before each operation!

The Quality of the motor oil is essential for the correct engine

surge and service life. Only use suitable and top quality

lubricants, improper lubricants destroy the device and lead to

immediate expiration of the warranty (a partial synthetic multi

purpose lubricant of the specification SAE 10 W 40 is

recommended). For delivery reasons it might happen that

there is no or only little motor oil in the machine (filling for in-

shop testing). The oil level has to be checked before each

operation in any case! For the check-up and for correction

of the oil level put the device in a horizontal position on even

ground. Always care about the environment when you empty

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude GV 2400 SL 95140 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude GV 2400 SL 95140 Manual

Product: