626236

Gude GV 1100 P 06004 Manual

11
Zoom out
Zoom in
Previous page
1/42
Next page
Use as designated
The verticutter is only suitable to be used around the house
and in the garden and must not be used for industrial
purposes. The appliance can only be used as designated.
Any other use is in conflict with its purpose.
Residual risks and protective measures
Direct electrical contact
Defective cable or plug can cause life-threatening
electric shock.
Have always any defective cables or plugs replaced by a
professional. Use the appliance only with connection with a
safety switch against stray current (RCD).
Indirect electrical contact
Injuries by conductive parts at exposed electrical or
defective construction elements.
The appliance must always be unplugged for servicing
purposes. To be used with a safety switch against stray
current (RCD) only.
Inadequate local lighting
Insufficient lighting represents a high safety risk.
Always ensure sufficient lighting when working with the
appliance.
Disposal
The disposal instructions are based on icons placed on the
appliance or its package. The description of the meanings
can be found in the “Marking” chapter.
Transport container disposal
The container protects the appliance against damage
during transport. Container materials are usually selected
so as not to harm the environment and dispose them in an
environment-friendly manner.
Returning the container back in the circulation saves raw
materials and reduces waste disposal costs.
Parts of the container (e.g. foils, styropore) can be
dangerous to children. Risk of suffocation!
Keep parts of the container out of reach of children and
dispose them as quickly as possible.
Operator requirements
The operator must carefully read and understand the
Operating Instructions before using the appliance.
Qualification
No special qualification is necessary for using the appliance
apart from detailed instruction by an expert.
Minimum age
The appliance can only be operated by persons over 18
years of age that have been familiarised with its operation
and working. Young people between 16 and 18 years of
age can only work with the appliance under adult
supervision.
An exception includes youngsters operating the appliance
within their professional education to achieve necessary
skills under trainer's supervision.
Training
Using the appliance requires only corresponding instruction
by a professional or reading the Operating Instructions. No
special training necessary.
Transport and storing
• The appliance must be cleaned thoroughly and kept out of
reach of unauthorised persons when stored for a longer
period of time.
• Secure the appliance against turnover every time it is to be
transported.
Assembly/first start-up
Some parts have been dismantled for the verticutter supply to
make transport easier. Screws, wheels, plastic hand wheels
and cable clamps are in a plastic bag. The appliance can easily
be assembled by following these instructions:
Handle post assembly
• Take the verticutter out of the package.
• Insert the bottom post with the handle in holes on the
verticutter.
• Now press the upper connecting post to the bottom
post and screw both parts together using star screws
(included in the supply) (pic. 4/A)
• Insert the connecting cable pull relief in the upper part
of the post with handle.
(pic. 4/D,E)
• Fix the cable from the 2-point safety switch to the
engine with the attached cable clamps sideways to
the upper parts of the post with handle.
Verticutter height calibration (GV 1100 P)
• Adjust the verticutter height on the front wheel axis.
• Pull the wheel axis on both sides and insert in
appropriate screening.
Verticutter height calibration (GV 1400 P)
• Adjust the verticutter height by turning the working
width adjusting wheel (pic. 2/9).
• Turn the adjusting wheel to the required position and
adjust the appropriate verticutter height.
Collection container assembly (GV 1400 P) (pic. 3)
• Connect the cloth container with the metal frame and
fasten tightly with plastic container clamps on the
metal frame.
• Open the rear cover and hang the collection
container on the holding rod on the cover using two
hooks (pic. 4/B/C).
• To operate the appliance without the collection
container, fix the hook for operation without collection
container (pic. 3).
Connecting cable pull relief
• To prevent accidental pull-out of the connecting cable
from the 2-point safety switch, please make sure the
connecting cable is correctly fastened to the cable
pull relief (pic. 4/D/E).
Verticutter start-up
• Before aerating, make sure the knife or its connecting
elements are not damaged in any way. Replace any
damaged knife if necessary.
11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GV 1100 P 06004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GV 1100 P 06004 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info