624569
12
Zoom out
Zoom in
Previous page
1/60
Next page
Circular saw blade sharpening (pict. 2 a 10)
After you adjust everything, set the safety pin (pict. 10)
so it will press a little against the saw blade.
Turn the machine on and start sharpening the saw blade
(pict. 2/10).
Press the handle (pict. 2/14) down so the rotation of the
grinding wheel corresponds with saw blade rotation and
the depth gauge is reached.
Pull the grinding wheel back and turn the saw blade so
another tooth can be sharpened.
Repeat these steps until all teeth are sharpened.
In case of double teeth disc, sharpen every second tooth,
then change the angle and sharpen the rest of teeth.
Inspections and Maintenance
Unplug the unit before any maintenance/adjustment
and cleaning. Unplug upon finishing the work as well
Unplug the unit before any maintenance/adjustment and
cleaning. Unplug upon finishing the work as well Keep the
machine clean and free of any dust. Oil the slide well to
prevent jerking.
Safety instructions for the inspection and maintenance:
Only a regularly maintained and well serviced product can be a
satisfactory tool. Lack of maintenance and care can lead to
unexpected accidents and injuries.
Inspections and Maintenance Schedule:
Time
Interval
Description Other Details
if Required
After every
use
Wipe the unit with clean dry cloth
or blow off with low-pressure air.
Transportation and Storage
The unit has been designed for stationary use only.
Any tools that are not routinely used should be stored in a dry
locked room.
Troubles-Causes- Troubleshooting
Trouble Cause Troubleshooting
Burning
disc
(blunt)
1. The sharpening surface
excessively lubricated.
2. Worn diamond layer.
1. Clean the unit with
the sharpening tool.
2. Replace the disc
Maintenance
Do you have any technical questions? A claim? Do you
need spare parts or the Operating Instructions?
You will be helped quickly and without needless bureaucracy
at our webpage www.guede.com in the Services section.
Please help us be able to assist you. To identify your machine
when claimed, we need to know its serial No., order No, and
year of production. All these details can be found on the type
label. Enter the details below for future reference.
Serial No.:
Order No.:
Year of production:
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
Email: support@ts.guede.com
EU DECLARATION OF CONFORMITY
We,
Güde GmbH & Co. KG
Birkichstrasse 6 D-74549 Wolpertshausen
Germany,
hereby declare that the design of the machines below
corresponds to the applicable requirements of the basic EU
safety and hygiene directives.
In case of alternation of the machine, not agreed upon
by us, this Declaration will lose its validity.
Machine description: Saw blade sharpener GSS 400
Art. No. #94217
Applicable EU Directives:
2004/108/EG
2006/95/EG
Applicable harmonised standards:
EN 61029-1:2000+A11+A12:03
EN 61029-2-4:2003+A1:03 in parts
EN 55014-1:2006
EN 61000-3-2:2006
EN 55014-2:1997/+A1:2001+A2:2008
EN 61000-3-3:2008
Date/authorised signature: 04.04.2012
Title of signatory: Managing Director
Mr Arnold
Technical documentation: J. Bürkle FBL; QS
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GSS 400 94217 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GSS 400 94217 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info