623134

Gude GSB 20 55197 Manual

25
Zoom out
Zoom in
Previous page
1/213
Next page
Shaft and Chuck Assembling (Fig. 12)
1. Carefully clean the Morse taper and the chuck and keep them free of any traces of oil and dust. Now. fit
the Morse taper (1) in the chuck (2) with a jerk.
2. Put the chuck (3) on the taper drift short cone.
3. Close the chuck jaws completely. To prevent any damage to the chuck. put a small spanner in and knock
the taper and the chuck up with 2-3 slight hits.
WARNING: To avoid any damage to the chuck. do not use metal hammer for hammering the chuck on
the shaft.
Removal of Chuck (Fig. 13)
1. If the chuck is to be lowered completely. unloose the quill sleeve (1). Use the advancement hand lever to
do it. There big oval holes on both sides of the quill sleeve (2).
2. Rotate the chuck (3) until the quill hole (4) and the sleeve hole are in alignment
3. Insert the wedge (5) and knock it slightly with a hammer.
4. Both the shaft and chuck will fall down from the quill.
Drill Assembling (Fig. 14)
1. Mount your drill by means of two holes (1) in the base plate to a stand or a bench. using premium
assembling material. That should prevent any rollover. slip or shift of the machine in operation.
IMPORTANT NOTICE: When the stand or the bench begin to move while the drill is working. fix it
safely to the floor.
Fig. 11
Fig. 12
Fig. 13 Fig. 14
25
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GSB 20 55197 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GSB 20 55197 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info