Manual Gude GS 350 95116 (page 11 of 40) (English, German, Dutch, French, Italian)

625870

Zoom out

Zoom in

1/40

Parts of the container (e.g. foils, styropore) can be

dangerous to children. Risk of suffocation!

Keep parts of the container out of reach of children and

dispose them as quickly as possible.

Operator requirements

The operator must carefully read the Operating

Instructions before using the appliance.

Qualification

No special qualification is necessary for using the

appliance apart from derailed instruction by an expert.

Minimum age

The may only be operated by persons over 18 years of

age.

An exception includes youngsters operating the appliance

within their professional education to achieve necessary

skills under trainer´s supervision.

Training

Using the appliance requires only appropriate instruction

by a professional or reading the Operating Instructions. No

special training necessary.

Maintenance

Do you have any technical questions? A claim? Do you

need spare parts or the Operating Instructions?

You will be helped quickly and without needless

bureaucracy at our webpage www.guede.com in the

Services part. Please help us be able to assist you. To be

able to identify your appliance when claimed, we need to

know details can be found on the type label. Enter the

details below for future reference.

Serial No.

Order No.

Year of production:

Tel.: +49 (0) 79 04 / 700-360

Fax: +49 (0) 79 04 / 700-51999

E-Mail: support@tr.guede.com

Servicing and storing

Caution! Wear appropriate working gloves as there is a

risk of injury by the cutting tool.

Caution! Never clean the reel mower under running water,

in particular, not under high pressure.

Servicing works not explicitly specified in these Operating

Instructions must only be provided by an authorised staff

as there may be dangerous situations that the operator is

unable to handle. Scheduled servicing or replacement of

spare parts may only be performed by an authorised staff.

Actions to be performed immediately after cutting and

before storing, e.g. after the season is over

• Clean the appliance. Remove any deposited

grass by a brush or cloth. To clean the

appliance, use a soft cloth and fine soap water

solution. Prevent any direct contact of the

appliance with aggressive cleaners. Aggressive,

volatile and caustic cleaners must not be used.

• To provide protection against corrosion, wipe all

metal parts with an oil-impregnated cloth or

spray them with spray oil.

• Keep the appliance covered in a dry, clean and

safe place inapproachable to children.

Troubleshooting

The table shows possible failures, their possible causes

and removal options. However, if you are unable to

remove the problem, contact a professional to assist you.

Symptom Possible cause Measure

Abnormal

sound

Loosened

bolts/parts

Foreign item in

knife

Knife irregularity

Knives touching

too much

Tighten the bolts

Remove the foreign

item

Remove the

irregularity using a

sharpening stone

Adjust the cutting

mechanism

Mower not

cutting finely

Inappropriate

knives setting

Blunt knife

Grass is too high

(e.g. grass has not

been cut for a long

time)

Adjust the cutting

mechanism

Sharpen or replace the

knife

Shorten the grass

using a sickle

Cutting mechanism setting

The cutting mechanism of the reel mower has been

factory-set to optimum values. If the mower does not cut

finely after being used for a long time, please adjust the

bottom knife setting.

GS 300 P #06000 REEL MOWER

1. Pull out the cotters and remove the sliding

handle from the reel mower.

2. The distance of the bottom knife and the knife

roller may be changed using adjusting screws

on both sides.

3. If the knife roller and the bottom knife hardly

audibly touch each other, the cutting mechanism

is adjusted properly.

4. Now proceed to the test cutting as described

below.

GS 350 #95116 REEL MOWER

1. Unscrew the nuts and remove the sliding handle

from the reel mower.

2. Incline the reel mower to side.

3. The distance of the bottom knife and the knife

roller may be changed using hex screws on both

sides in the bottom.

4. If the knife roller and the bottom knife hardly

audibly touch each other, the cutting mechanism

is adjusted properly.

5. Now proceed to the test cutting as described

below.

Test cutting

Put a slip of paper on the bottom knife so as it points to the

knife roller axis.

Turn carefully the knife roller. If the bottom knife is

adjusted properly, the paper will be cut off as if scissors

are used.

Repeat the test cutting for various knives.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude GS 350 95116 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude GS 350 95116 Manual

Product: