628577
15
Zoom out
Zoom in
Previous page
1/62
Next page
9. Place the pump
moving wheel
correctly.
10. Replace the
pump moving
wheel.
11. Contact the
customer service.
Vibration or
noisy
operation
1. Too high suction
lift/total head.
2. Foreign particle
blocks the suction
piping and/or the
pump moving wheel.
3. Unstable installation.
4. Unstable machine
installation.
5. Damaged pump
moving wheel.
6. Other technical
defect.
1. Change the
installation so that
the suction
lift/total head
does not exceed
maximum value.
2. Remove foreign
particle.
3. Stabilize the
installation.
4. Ensure stable
position of the
machine.
5. Replace the
pump moving
wheel.
6. Contact the
customer service.
The engine
does not start
or turns off
during
operation.
1. Low fuel.
2. No ignition spark.
3. Clogged
carburettor.
4. Clogged air filter.
5. Activated Auto
Stop because of
low engine oil
level.
6. Other technical
defect.
1. Open the
gasoline cock
and/or refuel.
2. Check the ignition
switch. Or check
the ignition plugs.
3. Clean the
carburettor.
4. Clean air filter.
5. Replenish engine
oil.
6. Contact the
customer service.
Service
Any technical questions? Complaint? Do you need
spare parts or operation manual?
Go to our website www.guede.com and the section
Service will help you quickly and without bureaucracy.
Please, help us to help you. In order to identify your device
in case of complaint, please indicate serial number, order
number and year of manufacture. All information is
available on the product label. To have all information
always at hand, put them down.
Serial number:
Order number:
Year of manufacture:
Phone: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Important information for the customer
Please be sure to know that returning the product in or after
the warranty period must be made in the original packaging.
EU DECLARATION ON CONFORMITY
The company
Güde GmbH & Co. KG
Birkichstrasse 6
74549 Wolpertshausen
Germany,
hereby declares that the design and structure of the devices
listed below and in designs marketed conforms to
applicable basic requirements of the EU directives on safety
and hygiene.
This declaration on conformity becomes void in
case of a change to the device not consulted with
us.
Identification of the devices:
ENGINE PUMP GMP 100 4T
Order No.:
#94253
Applicable EU directives:
2006/42 EG
2004/108 EG
2005/88 EG
2002/95 EG
2004/26 EG
Harmonized standards used
EN 809/AC:2010
EN 1679-1/A1:2011
Type Approval No:
e24*97/68SA*2002/88*0152*00
Date/signature of manufacturer: 12.12.2011
Information about signer: managing director
Mr Arnold
Technical documentation: J. Bürkle FBL; QS
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GMP 100 4T 94253 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GMP 100 4T 94253 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info