624843

Gude GL 200 Manual

6
Zoom out
Zoom in
Previous page
1/18
Next page
General Safety Instructions
Before you work with the product, please read the following
safety instructions and the operating manual carefully
through. If you hand over this product to other people,
please provide them also with the operating manual. Keep
the operating manual always safe!
Packing: Your product is located in a packing for the
protection against transport damage. Packings are raw
material and therefore can be recycled or be restored into
the raw material cycle.
Please read the user manual carefully through and follow
the instructions there. Familiarize yourself with the product,
the proper use as well as the safety instructions on the basis
of the user manual. Please keep these instructions safe for
future reference.
1. Please read thoroughly the Operating Instruction before
putting the laminate cutter into operation. All the
operating staff must be informed of safety regulations
concerning the appliance use.
2. Do not use the laminate cutter if you are tired, impaired,
intoxicated or have consumed drugs.
3. Always wear safety goggles, safety gloves and safety
shoes.
4. Make sure you can move your hands freely on the
device, so you can work safely.
5. Keep your workplace clean and tidy at all times and
ensure proper lighting. Chaos and work in dark can
cause injuries.
6. Secure the rotating lever when not using the device or
while transporting it.
7. Always keep your hands out of reach of the cutting area.
It could lead to serious injuries or amputation of limbs.
Behavior in case of emergency
Perform necessary first aid measures according to the injury
and call for medical attendance as soon as possible.
Prevent the injured against any further injuries and calm him
down.
Disposal
The hints over disposal result from the pictograms which are
applied on the product and the packing. A description of each
pictogram can be found in the chapter “markings on the
product“.
Requirements for the operator
The operator should have read the operating manual carefully
before using the product.
Qualification
Besides a detailed training through a skilled staff, no special
qualification for the use of the product is necessary.
Minimum age
The product may not be operated by people, who are less
than 16 years old.
The use by young people forms an exception, if the operation
takes place during a vocational training to achieve the skill
and under supervision through a trainer.
Training
The use of the product requires only a corresponding training
through a skilled staff or on the basis of the operating manual.
A special training is not necessary.
Operation
Make sure the Laminate cutter is positioned properly and
cannot be tipped over.
Instructions step by step
1. Mark a line in the place where the workpiece is to be cut.
2. Insert the workpiece in the laminate cutter and place the
cutting edge on the line with the lever being partially
pressed down.
3. Press the lever down with constant pressure.
4. Laminate is cut effortlessly and cleanly along the line
marked by you due to the extra long lever.
5. Place the workpiece cleanly to the stop and cut in the
required place at rectangular cuts!
Maintenance and protection
All service and repair works can be done by skilled
professionals only.
- Regularly remove dust and cuttings from the appliance.
- Grease the mechanical parts by suitable lubricant
Knife grinding:
The blade of the laminate cutter is made of wear-free
material. Due to its special shape, the cutting blade must
not be ground or sharpened.
Malfunction – reasons - elimination
Malfunction Possible reasons Elimination
The handle cannot
be moved neither
up nor down.
Look for bits of
stones on the
splitter.
Remove the bits of
stones using a
brush or by
blowing.
Workpiece is not
standing on
upholstered
supports evenly.
There can be small
bits of stones on
the upholstered
supports.
Clean up the
upholstered
supports and lower
part of the splitter.
6
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GL 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GL 200 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info