628645
19
Zoom out
Zoom in
Previous page
1/49
Next page
Storing
If the sweeper has not been used for a long time, the following
steps need to be taken:
thorough cleaning and repair of damaged varnish
lubricating of spots that need lubrication and sweeper run
for 1 – 2 minutes
applying anti-corrosive oil on the sweeping brush and
chassis.
Putting the sweeper out of operation and storing
Do not transport the sweeper, put it out of operation and store
when tilted forward, backward or sideways.
Do not store the sweeper in damp rooms, in rooms where
fertilizers are stored, in stables or near them. Tilting may cause
the engine oil to get to the combustion space, which in
consequence may bring problems wit starting and oil
carbonization – risk of strong corrosion formation.
Troubleshooting
Have all problems on your sweeper requiring major interference removed in your authorised shop. Any unauthorised interference may
cause damage. If problems cannot be removed by the described measures, you must quickly contact your authorised shop.
Failure
Cause
Measure
Engine not starting
Engine switch not in “I“ position (ON)
Fuel tap closed
Choke lever open
Socket plug not fitted
Spark plug dirty or faulty
Incorrect spark plug electrodes distance
Fuel tank empty
Old fuel
Put the engine switch to “I“ position
Open the fuel tap
Close the choke lever
Fit the socket plug
Clean or replace the spark plug
Set the electrodes distance to 0.7 – 0.8 mm
Add fuel
Replace old fuel with new one
Engine switching off
after being started
Air filter dirty
Too big distance of spark plug electrodes
Spark plug dirty or faulty
Clean the air filter
Set the electrodes distance to 0.7 – 0.8 mm
Clean or replace the spark plug
Engine failing
Socket plug or cable released
Fuel screen dirty
Air hole in the tank lid blocked
Air filter dirty
Old fuel
Fix the socket plug firmly on the spark plug
Fix the spark plug cable
Clean the fuel screen
Change the tank lid
Clean the air filter
Replace old fuel with new one
Engine failing in high
revolutions
Too small distance of spark plug electrodes
Set the electrodes distance to 0.7 – 0.8 mm
Engine with too low
output
Air filter dirty
Sweeping brush blocked by foreign items
Clean the air filter
Remove foreign items off the sweeping brush
Engine getting too
much heated
Cooling air system blocked
Too little of engine oil
Air filter dirty
Clean the ventilation louvers and cooling fins
Add engine oil
Clean the air filter
Sweeping brush not
working
Sweeping brush blocked with foreign items
Bowden cable set too freely
Remove foreign items and check whether the sweeping
brush is not damaged
Set the Bowden cable
Sweeping depth too
small
Sweeping brush setting too small
Worn-out brushes
Set the sweeping brush
Replace the brushes
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GKM 6.5 ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GKM 6.5 ECO in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info