628935
10
Zoom out
Zoom in
Previous page
1/56
Next page
Qualification
No special qualification is necessary for using the appliance
apart from detailed instruction by an expert.
Minimum age
The appliance can only be operated by persons over 16 years
of age. An exception includes youngsters operating the
appliance within their professional education to achieve
necessary skills under trainer's supervision.
Training
Using the appliance only requires appropriate instructions by
a professional or reading the Operating Instructions. No
special training necessary.
Technical specifications
GH 3 P Electric Heater
Voltage: 230 V
Frequency/protection
type:
50 Hz/IP 44
Max. heating output: 3 kW (2,580 kcal per hour)
Heating levels: 1/fan
Input: 13 A
Fan output: 305 m³ per hour
Weight app. 5.5 kg
Dimensions L x W x H in
mm:
250x330x370
Art. No. 85107
Transport and storage
The appliance may be transported using the travel
handle.
Appliances not being used should be kept in a dry
and locked room.
Operation (pic. 2 + 3)
The appliance may be put into operation after reading and
understanding the general safety instructions and
appliance-specific safety instructions. In doing so, proceed
as follows:
To reach optimum heat distribution, put the electric heater in
the middle of the room if possible or at least 1 m from the
wall. With this, air will circulate better and the room will get
warm quicker. All windows and doors must remain closed.
Connection (pic. 2):
Put the feeder cable to a suitable outlet.
Make sure your electrical network is protected
appropriately.
Operation (pic. 3):
Use the thermostat regulator and set the required
switch-off temperature.
The function switch has 3 switch levels
= OFF
= ventilation
= 1 heating level
To switch the electric heater off, let the function button in the
"Fan" position for app. 3-5 minutes. The appliance may then
be switched off or unplugged.
Never unplug the appliance when hot – let it cool down
first. The fan may still ventilate even when in the off position.
Power consumption corresponds to the sum of the heating
output (kw) and fan output.
Thermostat setting
Set the thermostat to the average switch-off
temperature.
Set the electric heater to the full heating output and let it
heat until the thermostat switches off. - until you hear
“snapping in”.
After reaching the set temperature, the heating spiral
switches off and the fan keeps running to circulate the
air. As soon as the temperature drops, the heating spiral
switches on again.
If the room temperature is too low, turn the thermostat
regulator more to the right and switch the heater on
again.
If the room temperature is too high, turn the thermostat
more to the left and let the room get cooler.
Keep repeating these steps until reaching the required
switch-off temperature.
Attention: For the first commissioning of the electrical
heater, it can sometimes be an unpleasant odor which
is completely harmless and completely disappears with
increasing operating time.
10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GH 3 P - 85107 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GH 3 P - 85107 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info