628852

Gude GGH 10 INOX 85005 Manual

9
Zoom out
Zoom in
Previous page
1/68
Next page
• If gas leakage remains, call an expert before re-
commissioning.
• Assembly and maintenance of the device must
comply with laws and directives of a country
where the device is used.
• Do never turn the gas cylinder upside down
even though you think it is empty! This
procedure may jam the hose with residues from
the gas cylinder and cause fire hazard and
immediate damage of the device.
• Do not disassemble the protective grid and/or
other parts of the heater.
• Keep children out of reach of the burner.
• Do not operate the device without supervision!
• Do not cover the device!
• Do not use for drying of clothes etc.!
• Do not touch the protective grid and thermal
shield, otherwise burning injury may occur!
Assembly and commissioning instructions (Fig.
A/B/C)
Do not use the device close to flames, sparks or
flammable substances (except for substances required
for operation - here propane/butane).
Operate the device on a flat and stable surface.
Step 1 (C/1)
Plug the device to a socket (230V~50Hz).
Step 2 (C/2)
• Connect the reduction valve (B/7) with the gas
hose connection (B/8).
• Connect the reduction valve (B/7) with the fitted
gas hose to the gas cylinder valve (B/12).
• Connect the gas hose connection (B/9) with the
heater.
Step 3 (C/3)
Screw out the gas cylinder valve (B/12).
Check the screw closures by tightness test
spray or use a soap liquor. Retighten, if necessary.
Step 4 (Fig. C/4)
Press ON/OFF switch (A/6).
Step 5 (Fig. C/5)
From suction side check whether the fan (A/1) revolves.
Step 6 (Fig. C/6)
• If the fan (A/1) revolves, keep the gas valve
button (A/11) pressed and at the same time,
press repeatedly the ignition button (A/5) until
the burner ignites.
• Hold the gas valve button (A/11) pressed for 10
to 20 more seconds.
• Check whether the gas heater works
uninterruptedly.
Turning off (Fig. D)
Step 1 (Fig. D/1)
To turn the heater off, first screw in the gas cylinder valve
(B/12).
Step 2 (Fig. D/2)
Turn off the device with the use of ON/OFF switch (A6).
Step 3
Unplug the device from the socket to disconnect power
supply.
Replacement of gas cylinder
• Always replace the gas cylinder outside and out
of reach of flames or flammable sources without
presence of other persons!
• Close the gas cylinder valve. (B/12)
• Screw out the reduction valve (7).
• Ensure you have the reduction valve seal
available.
• Connect the device to a new gas cylinder and
proceed according to instructions in "Assembly
and commissioning instructions".
Identification
Product safety:
The product complies with
relevant EU standards
Prohibitions:
No flame!
No operation in closed
spaces!
No smoking! No pulling the plug!
Warning:
Warning/caution Caution! Hot surface!
Caution! Dangerous electric
voltage!
Use outside only, however,
protect against rain.
Caution! Dangerous electric
voltage!
Commands:
General prohibition sign
Read operation manual
before use
Secure the gas cylinder
against falling
Unplug the device from
socked before opening or
maintenance
9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GGH 10 INOX 85005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GGH 10 INOX 85005 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info