Manual Gude GF 600 94369 (page 12 of 48) (English, German, Dutch, French, Italian)

626566

Zoom out

Zoom in

1/48

Operating lever (Fig.18)

O = OFF

= choke

= slowly = quickly

Starting/stopping the machine

Switch the handle to the Choke (Fig. 18). Now pull the starting

string uniformly. The engine should start after 3 to 5 pulling

the starting string. Put the handle (Fig. 18) onto the required

speed and after that press the drive handle against the pillaret

(Fig. 19)

Caution: If the engine has been warmed yet it can be started

immediately into the position Slowly or Quickly.

After releasing the drive handle the drive stops but the engine

keeps running. The engine can be stopped only by switching

the switch into the OFF position (Fig. 18).

When starting the engine the machine must not tilt,

only if necessary for the operator to start the engine at

reverse side.

Safety instructions for the operator

• Use the machine only after having the guide for

operation carefully.

• Observe all safety instructions specified in the

guide.

• Act responsibly towards other persons.

• This machine is equipped with a brake of plough-

blades to ensures that plough-blades stop after

release of drive handle not later than in 3 seconds.

Do not try to stop plough-blades or tilt the machine

with rotating plough-blades aside under any

circumstances. Wait until the plough-blades stop

automatically.

• If plough-blades contact with a foreign object

please stop the engine immediately and check the

machine for damage when plough-blades stopped.

Continue working only with undamaged machine.

• Walk only when working, no not run.

• Always walk forward when working. Never go back

with the machine.

• On slopes work always across them and never up

and down. Be especially careful when changing the

direction.

• When crossing areas without grass and

transportation to the workplace and back the

plough-blades must not be in operation.

Step-by-step guide

1. Fill the fuel into the machine (chapter Assembly and

1putting into operation for the first time)

2. Remove any foreign objects from the terrain.

3. Cultivate the terrain with garden cutter until the soil is

sufficiently cultivated.

4. Clean the machine thoroughly after each use.

Inspections and maintenance

Safety instructions for inspections and maintenance

Only regularly maintained and treated machine can become a

satisfactory instrument. Insufficient maintenance and care

could lead to unforeseen accidents and injuries.

• Always stop the engine and disconnect the spark plug

extension in case of any work on the machine!

• Never use aggressive cleaning agents for cleaning. It

could damage or destroy the machine.

Inspection and maintenance plan

Before start of work:

• Check the state of engine oil (Fig.13A+14)

• Check for loosen parts

Every 25 hours of operation

• Engine oil replacement

• Engine oil condition check

• Air filter cleaning (Fig.20))

• Removing of remainders of grass or soil from

rotating parts with a brush or an unpointed object.

• Wiping of the cover with a soft cloth.If a dirt is

stiffened the machine may be cleaned using a soft

cloth soaked with soapsuds.

Every 100 hours of operation

• Inspection, cleaning and possible spark plug

replacement.(Fig.21)

Maintenance

Do you have any technical questions? A claim? Do you need

spare parts or the Operating Instructions?

You will be helped quickly and without needless bureaucracy

at our webpage www.guede.com in the Services part. Please

help us be able to assist you. To be able to identify your

appliance when claimed, we need to know its serial No., order

No. and year of production. All these details can be found on

the type label. Enter the details below for future reference.

Serial No.

Order No.

Year of production:

Tel.: +49 (0) 79 04 / 700-360

Fax: +49 (0) 79 04 / 700-51999

E-Mail: support@ts.guede.com

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude GF 600 94369 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude GF 600 94369 Manual

Product: