Manual Gude GE 290 TC - 20007 (page 15 of 106) (English, German, Dutch, French, Italian, Turkish)

622224

Zoom out

Zoom in

1/106

Assembly Group 2 Parts of Delivery

Fig. 3

Fig. 1 – Pos. 2

Fig. 1 – Pos. 3 / 2x

Fig. 1 – Pos. 4

Fig. 1 – Pos. 12

Assembly Group 4 Assembly Groups Required Parts of Delivery

Fig. 4

Assembly Group 3 Fig. 1 – Pos. 9

Fig. 1 – Pos. 10

Fig. 1 – Pos. 12

Safety Instructions for First Putting in Operation

• Check the power supply for sufficient protection (16 A, inertial)

• Wear required clothing (see Fig. 6)

• Make sure that no other persons are present on the working site or the area of hazard.

• Take care for no inflammable material being on the site.

Fig. 6

1. welder´s helmet

2. welder´s apron

3. welder´s gloves

Procedure

Carry out the assembly of separate parts in the order as indicated in figures. Mind the correct arrangement

of the parts.

Operation

Fig. 7

1. Thermal Protection indicator

2. „Stand by“ Indicator

3. Welding degrees stop ring

4. Earthing connection

5. Electrode holder connection

6. Voltage selector

Fig. 8

Having changed from 230 V to 400 V, take steps as follows:

1. Unplug the unit.

2. Put the switch at „0“.

3. Remove the lock screw and fit it on the 400 V side.

4. Before putting the unit in operation again, make sure that the knob may be turn in position 400 V and cannot be turned in position

230 V.

- The unit may be used at a room temperature from 20°C without the thermal protection being put on with the

number of reference electrodes n

; and n

from warm condition without switching the thermal protection on.

- The earthing tongs need to be connected with the piece to be welded in a way providing for a good contact. The

touch points should be cleaned so that no grease or other impurities that could adversely affect the welding output

are present.

- The unit has a main switch, yellow light indicator, thermal protection and a hand wheel to control the welding

current. The control is done with regard to welding current valuea and electrode diameter.

Cuation: The indicators will light at overloading only.

Thermal protection is provide on the unit to switch off the welding current supply automatically as soon as

the inner temperature. As it drops to a value of correct operation, the unit switches on again.

Operation Safety Precautions

See also chapter Residual hazards and safety measures and safety action arising

therefrom.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude GE 290 TC - 20007 in the language / languages: English, German, Dutch, French, Italian, Turkish as an attachment in your email.

The manual is 1,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude GE 290 TC - 20007 Manual

Product: