622223
13
Zoom out
Zoom in
Previous page
1/164
Next page
GB
Wear heavy-duty insulating shoes.
Make sure that working area is properly ventilated to prevent accumulation of harmful fumes and
toxic smoke.
Never work in wet places without efficient safety measures against electrical discharges.
After the work, the electrode has to be taken from the electrode tongs to prevent undesired arc
formation.
The welding machine should not be used or stored in rain.
If the unit is in operation, the electrode tongs should not be put on the unit or other electric
appliances as the safety device may get damaged or disconnected when grounded.
Do not touch the electrode or another metal object in contact with the electrode while welding is in
progress.
Check that all cables are coated (mainly the contacts with the power cable). The cables with
insufficient insulation should be immediately replaced with the same size cables meeting the
regulations.
Disconnect the unit from the source where not used.
The unit may influence supply of other units according to characteristics of the mains. Seek advice
from an authority responsible for the power supply whenever in doubt.
Emergency Procedures
Give first aid appropriate to the injury and call a qualified medical help as fast as possible.
Protect the injured against more harm and put him/her in a resting position.
Unit Marking
Meaning of Symbols
Symbols shown below are used in this manual and on the unit:
Product Safety:
Product conforming to
respective EU
standards
Bans:
General Prohibition
(in combination with
another pictograph)
Don´t pull the cable
Do not use the
machine in wet
weather
Warnings :
Warning/caution
Beware of hazardous
volrage
Do not Reach in
Equipment
Keep safety distance
Commands/Instructions:
Wear goggles Wear safety footwear Use protection gloves
Wear protective
clothing
Use protection shield Unplug before opening
Read instruction
manual before use
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GE 235 TC - 20005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GE 235 TC - 20005 in the language / languages: English, German, Dutch, French, Italian, Swedish, Norwegian as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info