622221

Gude GE 145 W - 20001 Manual

11
Zoom out
Zoom in
Previous page
1/76
Next page
EN 60974-6:2011: European standard for welders for hand
arc welding with a limited time of
switching
50 Hz: System frequency
U
1
: System voltage
I
1 max
: The highest rated value of line current
U
0
: Rated idling voltage
I
2
: Welding current
Ømm: Electrode diameter
I
1eff
: The highest line current effective value
[A]
IP21S: Protection type
H: Insulation class
1~50 Hz: A/c symbol and frequency rated value
Rated maximum welding time in
continuous mode at the rated maximum
welding current at an ambient
temperature of 20°C.
Rated maximum welding time in
intermittent mode at the rated maximum
welding current at an ambient
temperature of 20°C during an
uninterrupted time of 60 Min.
Warranty
A warranty period of 12 months applies to commercial use
and 24 months apply to private use and commences on the
day of purchase of the device.
Warranty applies exclusively to failures due to defective
material or workmanship. An original sale slip with indication
of date of sale must be presented in case of claiming for the
warranty rights.
Warranty does not cover unprofessional use such as device
overload, violent use, damage caused by third party or foreign
materials, failure to comply with operations and assembly
manual, and normal wear and tear.
Behaviour in case of emergency
Provide necessary first aid treatment corresponding to the
injury nature and seek qualified medical help as soon as
possible. Protect the injured person from other injuries and
calm him/her down.
In case of accident, first aid kit must always be available
in the place of your work in accordance with DIN 13164.
Material taken out of the first aid kit needs to be
supplemented right away.
Please provide the following details if help is needed:
1. Place of accident
2. Accident nature
3. Number of injured persons
4. Injury type
Disposal
The disposal instructions are based on icons placed on the
machine or its package. The description of the meanings can
be found in the “Marking“ section.
Transport package disposal
The package protects the machine against damage during
transport. Packing materials are usually chosen depending on
their environmental friendliness and disposal method and can
therefore be recycled. Returning the package to material
circulation saves raw materials and reduces waste disposal
costs. Parts of packages (e.g. foils, styropor®) can be
dangerous to children. Risk of suffocation! Keep parts of the
package away from children and dispose them as soon as
possible.
Residual Hazards and Protective Action
1. Electrical Residual Hazards:
Indirect electrical contact:
A contact with earthing terminal and the
electrode holder at a time may result in
electrical shock
Avoid a contact
2. Thermal residual contact:
Burns, frost bites:
Contact with a welded piece may cause severe
burns.
Do not touch the piece, only with welder’s gloves.
Burning pieces flow away during the welding and
may cause damage even to the protection
clothing.
Wear welder’s protection clothing.
3. Radiation exposure hazard:
Ultraviolet, infrared and visible light.:
Direct sight in the light arch may injure eyes
seriously.
Always work with a welding shield
4. Materials and other substances hazard:
Contact, aspiration:
Long-time aspiration of welding gases may be
health hazardous
Work with exhaustion. Work in a well-ventilated
area. Prevent direct aspiration of gases.
Fire or explosion:
Combustible materials may set on fire in
immediate vicinity of welding site t.
Do not weld near combustible materials.
Oil, fuel or a gas tank may explode in the
course of welding.
The tanks and vessels of any type should be
completely emptied, cleaned and ventilated. Only
a skilled professional is allowed to weld them
5. Human factor negligence:
Negligent use of personal protection equipment:
Welding without use of required protection
equipment is hazardous for health.
Always use suitable protection aid for welding.
Transport und Lagerung
When storing, it is necessary that the appliance is
put to a dry place, inaccessible to children and
unauthorised persons.
Clean the appliance thoroughly before longer
putting out of operation. The unit should be stored
at a dry place inaccessible to unauthorised
persons. Make sure that it is unplugged. Remember
that also the electrodes should be stored at a dry
place.
Inspections and Maintenance
Only a unit maintained and cared for on a regular basis may
be a serviceable aid. Insufficient maintenance and care may
result in emergencies and unforeseen accidents.
Before every start of work:
Check the unit function. Do not work with a defective
unit.
Check the cable for damage and replace it with a cable
of the same quality if necessary.
11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GE 145 W - 20001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GE 145 W - 20001 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info